Question about Maytag MAH8700A Front Load Washer
I think the cold side of your water valve is stopped up at the screen. Just take your hose off at the machine and get the crud off the screen in the valve. It only does it in rinse because you have cold rinses. When warm water comes in, it will fill just fine because the hot water is not blocked
Posted on Sep 07, 2007
Possible that you would have a tub seal leak if it is only noticable during spin cycle. Possible that it "drips" slightly while in agitation, but not enough to notice it. While in spin mode you have a lot more parts moving as well as a lot more water pressure on the seal itself. Pump could also be leaking, but highly doubtful since it would leak a constant amount at all times. Good Luck!!! Jim
Posted on Sep 09, 2007
purely based on the vague information you have given, this could sound like the drum bearings and the fact that it has been neglected for so long has resulted in serious damage to your machine, note to all, never continue to use machines making noises, it can only get worse and do mare costly damage, after all the problem could have been a very inexpensive fix problems on this and any other site, to be fixed by messages (without actually seeing the machine) can only be fixed - or advice can only be given based on the details that are given if you say my machine just stopped then you will not get an answer will you? engineers can help sort out lots of problems without seeing the machine if we are given the right DETAILED information, no matter how silly it sounds, so before you shout and complain at others, have a thought about what you are going to write sorry its bad news but i hope i have helped
Posted on Oct 02, 2007
either balance load sensor or machine failing to drain in the allocated time, check pump/filter for blockage
Posted on Dec 27, 2007
very loud in spin cycle can mean a bad rear bearing, not something a homeowner would want to try to replace, parts would exceed 6-7 hundered dollars. you may have some extended part warr through the manufacture. still probly gonna be a 5 hundred when the labor is added in
Posted on Dec 06, 2008
Tips for a great answer:
Apr 05, 2018 | Neptune Washing Machines
Jan 06, 2016 | Washing Machines
Sep 20, 2014 | Maytag Washing Machines
Aug 24, 2011 | Maytag Neptune FAV6800AW Top Load Washer
Jun 16, 2011 | Maytag MAH6700AWW Neptune Front-Load...
Jun 09, 2010 | Maytag Washing Machines
May 26, 2010 | Maytag Neptune MAH5500B Front Load Washer
May 12, 2009 | Washing Machines
May 05, 2008 | Maytag MAH6500 Neptune Front Loading...
64 people viewed this question
Usually answered in minutes!