No sound on my rt2350 - RCA RT2350 System

sadly, no :(

There has to be another code for this then. Remotes have a way of manually programming them by going through all available codes known and not just the listed code that is supposed to work. I would follow the instructions for that method to find the proper code.

Thinkin maybe check to see if there is an HDMI or S-Video option?

Audio amplifier IC´s damaged need to replace it

connect all the devices into the receiver inputs then there should be 1 set of outputs to the tv. This is to play everything using surround sound as all the video and audio is going through your recevier... if you want to do HD and have surround sound you will need a new receiver as this one has no hdmi inputs or outputs.

sounds like a component is getting hot. It probably needs to be looked at.

make sure your input signal is DTS.

Select control panel >Sound and audio devices >select Sounds> Sound scheme options check whether the windows default theme is set. if not then set windows default theme.

thank you !

The amp probably shorted out from bad cable or yop probabaly you drove the amp into clipping and it blew out