Is the King Kutter ATV SeederSpreader suitable for applying lime? If so what setting shoud be used? Thanks, Doug (Giles County, VA)

either idler pulley bad or wrong belt installment

Ask a more specific question about what you want help with. The site is self explanatory. Statistics are irrelevant. Obviously, if you don't ask a specific or pertinent question, the wait time is forever.

from underside???? wish it was a three point mount i'll bet

You are talking about a three point hitch ... they can be tricky. Might be worth the time to go to the farm supply store in your community and take a look at how it should be hooked up and operated. It is dangerous to operate this device with out some training.

I have run into a couple of issues with these. First is the traveling wheels sometimes don't lift high enough or fall The second is that the unit sometimes works better with cement ballast added to the top of the unit. This may not be your issue at all, but I hope it helps. Please let me know if I can be of further assistance:)

USE SAY A BROOM STICK AND ON THE OUTSIDE ON THE DECK YOU CAN USE IT LIKE A STETHOSCOPE AND PUT IT TO YOUR EAR AND LISTEN TO DIFFERENT SPOTS ON THE DECK TO HELP YOU ZERO IN ON THE CULPRIT .. IF'N I WAS ANY HELP VOTE FOR ME ...THANKS.. JAY

In Gearboxes use gear oil (type GL5-85W 140 or Triple Zero
Grease; which can be poured, and has "EP" i.e. "Extreme Pressure" additives.) Fill the gearbox to approximately half-full level.

90 wt gear oil

http://www.kingkutter.com/
Perhaps you can find it here? Hope this helps.

If it is leaking around the shaft you can replace the seal.