Hi
I bout a second hand Canon SmartBase MP360S printer.
Automatic installation was OK.
Try to print but everything was running fine, except there was no printout to show.
Changed B&W and colour cartridge and noticed the same problem.
Left it few days and tried again noticed the following
1- There is delay of responding by the printer about 3 minutes
2- Receive message: Ann error ha occurred when printing the following print job. Click cancel to stop printing.
Then click [Start Status Monitor], gave another message: printer not responding. & Paper Thickness Lever Position
I have Microsoft Windows Vista.
Greatly appreciate any help that you can offer.
Thank you
Jas
[email protected]
You have Vista this is the problem- there may be a driver issue here
take a look at
http://www.google.co.uk/url?sa=t&ct=res&cd=3&url=http%3A%2F%2Fwww.opendrivers.com%2Fcategorycompany%2F1405%2F129%2Fmultifunction-canon-free-driver-download.html&ei=DvyBSL7IOZ3uQo-KpLYN&usg=AFQjCNExG7VOz91yswKZfouV8puBHufbKQ&sig2=gL2G5p7ndcDLosNQmPsh4w
149 views
Usually answered in minutes!
×