Question about Simplex Kaba Ilco Unican 1000 keyless lock

I am trying to change the code on my 1000 lock but do not know what a spanner wrench looks like? i just started this job and dont seem to have all the things i need to change the code.

1 Answer

Coaltowner

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.
Master
963 Answers

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

Posted on Mar 06, 2011

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Ineed a spanner wrench, so I can change the code of my Kabe 100 digital lock. Can you help? Thank You Brian

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp
Tenth item down on the page.

Good luck--and please provide feedback if this helps!

Sep 19, 2011 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

We are trying to change the code on the Simplex 1000 Series door lock; however every time we turn the outside door counter clock wise and it is supposed to lock in position it does not and we can't...

I found this instruction elsewhere on the Fixya! site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF SIMPLEX 1000 SERIES CIPHER LOCKS

1.) ENSURE THE DOOR IS OPEN.

2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE

DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.

3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.

4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.

5.) PRESS IN THE EXISTING COMBINATION FIRMLY.

6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE

O'CLOCK POSITION.

7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE

THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.

8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS.

REMOVE THE SPANNER WRENCH.

9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.

10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a

maximum of five.

11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND

CHECK IF THE LATCH IS RETRACTED.

12.) RELEASE THE DOOR KNOB.

13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH

SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.

14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59

CONTROL KEY (DO NOT OVERTIGHTEN!)

REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp

You will find a link to download the manual for your model on this page:

http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13

These are PDF files, requiring Adobe Reader to open. There is a link on the same page to download Adobe reader.

Customer service can be contacted from this link:

http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspx

Tech Support from this link:
http://www.kaba-ilco.com/access_control/support_contacts/technical_support.aspx

Good luck!

Apr 22, 2011 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

I have a Simplex Kaba Ilco Unican 1000 keyless lock and I want to change its password. But I don't know how to do it. Is there anybody to help me? It's urgent please...

I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF SIMPLEX 1000 SERIES CIPHER LOCKS

1.) ENSURE THE DOOR IS OPEN.

2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.

3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.

4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.

5.) PRESS IN THE EXISTING COMBINATION FIRMLY.

6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE O'CLOCK POSITION.

7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.

8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS. REMOVE THE SPANNER WRENCH.

9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.

10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a maximum of five.

11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND CHECK IF THE LATCH IS RETRACTED.

12.) RELEASE THE DOOR KNOB.

13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.

14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59 CONTROL KEY (DO NOT OVERTIGHTEN!)

REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

Good Luck!

Mar 04, 2011 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

Hi, I have an older version of the Ilco unican corp pistol safe. IT is a simplex with the push buttons and a silver turner. I got it open, but don't know how to re program the code. Any help?

I found this instruction elsewhere on this site ( thanks to pctuneup191):
pctuneup191

PROCEDURES TO CHANGE THE COMBINATION OF SIMPLEX 1000 SERIES CIPHER LOCKS

1.) ENSURE THE DOOR IS OPEN.

2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.

3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.

4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.

5.) PRESS IN THE EXISTING COMBINATION FIRMLY.

6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE O'CLOCK POSITION.

7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.

8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS. REMOVE THE SPANNER WRENCH.

9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.

10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a maximum of five.

11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND CHECK IF THE LATCH IS RETRACTED.

12.) RELEASE THE DOOR KNOB.

13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.

14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59 CONTROL KEY (DO NOT OVERTIGHTEN!)

REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

Good Luck!

Feb 25, 2011 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

We have a Simplex LL101126D41 Combination lock and tried to change the code following the instructions for an earlier model (on that does not have the handle). Now the lock will not recognize the new nor...

I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF

SIMPLEX 1000 SERIES CIPHER LOCKS

1.) ENSURE THE DOOR IS OPEN.

2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE

DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.

3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.

4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.

5.) PRESS IN THE EXISTING COMBINATION FIRMLY.

6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE

O'CLOCK POSITION.

7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE

THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.

8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS.

REMOVE THE SPANNER WRENCH.

9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.

10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a

maximum of five.

11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND

CHECK IF THE LATCH IS RETRACTED.

12.) RELEASE THE DOOR KNOB.

13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH

SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.

14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59

CONTROL KEY (DO NOT OVERTIGHTEN!)

REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from

this site:
http://www.ckilock.com/Mpage18.asp

Here is the "literature grid" from the KABA website, which has manuals and parts lists for the
Simplex mechanical pushbutton locks:

http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.
aspx?id=13

Good Luck!

Feb 11, 2011 | Simplex Kaba Ilco Unican L1000 keyless...

1 Answer

Lost code for 5 number lock

I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF

SIMPLEX 1000 SERIES CIPHER LOCKS

1.) ENSURE THE DOOR IS OPEN.

2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.

3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.

4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.

5.) PRESS IN THE EXISTING COMBINATION FIRMLY.

6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE O'CLOCK POSITION.

7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.

8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS. REMOVE THE SPANNER WRENCH.

9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.

10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a maximum of five.

11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND CHECK IF THE LATCH IS RETRACTED.

12.) RELEASE THE DOOR KNOB.

13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.

14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59 CONTROL KEY (DO NOT OVERTIGHTEN!)

REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp

Here is the "literature grid" from the KABA website, which has manuals and parts lists for the Simplex mechanical pushbutton locks:
http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13

Good Luck!

Jan 26, 2011 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

We are trying to change our code for ILCO, Unican Corp. keyless lock, serial # 743660000, model # 201049 USA (think it is model #) It appears we have lost the default code, how do we find a default code. ...

I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF

SIMPLEX 1000 SERIES CIPHER LOCKS

1.) ENSURE THE DOOR IS OPEN! This is totally necessary to reset the combination!

2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.

3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.

4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.

5.) PRESS IN THE EXISTING COMBINATION FIRMLY.

6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE O'CLOCK POSITION.

7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.

8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS. REMOVE THE SPANNER WRENCH.

9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.

10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a maximum of five.

11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND CHECK IF THE LATCH IS RETRACTED.

12.) RELEASE THE DOOR KNOB.

13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.

14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59 CONTROL KEY (DO NOT OVERTIGHTEN!)

REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp

Here is the "literature grid" from the KABA website, which has manuals and parts lists for the Simplex mechanical pushbutton locks:
http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.aspx?id=13

Good Luck!

Jan 17, 2011 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

Need to know how to reprogram the code on a Simplex Kaba IIco Unican 1000 keyless lock

I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF

SIMPLEX 1000 SERIES CIPHER LOCKS

1.) ENSURE THE DOOR IS OPEN.

2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE

DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.

3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.

4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.

5.) PRESS IN THE EXISTING COMBINATION FIRMLY.

6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE

O'CLOCK POSITION.

7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE

THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.

8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS.

REMOVE THE SPANNER WRENCH.

9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.

10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a

maximum of five.

11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND

CHECK IF THE LATCH IS RETRACTED.

12.) RELEASE THE DOOR KNOB.

13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH

SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.

14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59

CONTROL KEY (DO NOT OVERTIGHTEN!)

REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp

Here is the "literature grid" from the KABA website, which has manuals and parts lists for the
Simplex mechanical pushbutton locks:
http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.
aspx?id=13

Customer service can be contacted from this link:

http://www.kaba-ilco.com/access_control/support_contacts/service_and_support.aspx

Good Luck!

Dec 05, 2010 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

I NEED TO RESET THE SIMPLEX 5 BUTTON LOCK, BUT I DON'T REMEMBER THE CODE, HOW DO RESET IT???

I found this instruction elsewhere on this site ( thanks to pctuneup191):

PROCEDURES TO CHANGE THE COMBINATION OF

SIMPLEX 1000 SERIES CIPHER LOCKS

1.) ENSURE THE DOOR IS OPEN.

2.) INSERT THE DF-59 CONTROL KEY INTO THE COMBINATION CHANGE PLUG ASSEMBLY (ON THE BACK OF THE

DOOR) AND UNSCREW THE CYLINDER BY TURNING THE KEY COUNTERCLOCKWISE.

3.) TAKE THE CHANGE PLUG ASSEMBLY COMPLETELY OUT OF THE DOOR.

4.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE ALL THE WAY UNTIL IT STOPS, THEN RELEASE THE KNOB.

5.) PRESS IN THE EXISTING COMBINATION FIRMLY.

6.) INSERT THE SPANNER WRENCH IN THE COMBINATION CHANGE SLEEVE. IT SHOULD INSERT AT THE NINE

O'CLOCK POSITION.

7.) TURN THE SPANNER WRENCH GENTLY CLOCKWISE UNTIL IT STOPS AT THE 12 O'CLOCK POSITION. NOTE

THE NOTCHES IN THE COMBINATION CHANGE SLEEVE MOVES AS THE SLEEVE IS MOVED.

8.) TURN THE SPANNER WRENCH COUNTERCLOCKWISE BACK TO THE NINE O'CLOCK POSITION UNTIL IT STOPS.

REMOVE THE SPANNER WRENCH.

9.) TURN THE OUTSIDE DOOR KNOB CLOCKWISE (ALL THE WAY, UNTIL IT STOPS), THEN RELEASE.

10.) INSERT THE NEW COMBINATION BY PRESSING IN THE BUTTONS. USE AT LEAST three numbers and a

maximum of five.

11.) TURN THE DOOR KNOB CLOCKWISE ONCE, ALL THE WAY, UNTIL IT STOPS. HOLD IN THIS POSITION AND

CHECK IF THE LATCH IS RETRACTED.

12.) RELEASE THE DOOR KNOB.

13.) TURN THE DOOR KNOB CLOCKWISE ONE MORE TIME TO THE STOP POSITION. AT THIS POINT, THE LATCH

SHOULD NOT RETRACT UNLESS YOU USE THE NEW COMBINATION.

14.) REINSERT THE CYLINDER INTO THE BACK OF THE DOOR BY SCREWING IT IN CLOCKWISE WITH THE DF-59

CONTROL KEY (DO NOT OVERTIGHTEN!)

REMOVE THE KEY.

A Df-59 key can be purchased at this site:

http://absupply.net/kaba-access-control-lock-1000-series-key-df59.aspx

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from

this site:
http://www.ckilock.com/Mpage18.asp

Here is the "literature grid" from the KABA website, which has manuals and parts lists for the
Simplex mechanical pushbutton locks:

http://www.kaba-ilco.com/access_control/literature/literature_grid_mechanical_pushbutton_locks.
aspx?id=13

Good Luck!

Nov 22, 2010 | Simplex Kaba Ilco Unican 1000 keyless...

1 Answer

I need a kaba ilco spanner wrench to change the combination on a 1000 series lock. where do i get it?

The spanner wrench (SMPBC201278 Simplex:SpannerWrench $9.00) referred to can be purchased from this site:
http://www.ckilock.com/Mpage18.asp

Sep 21, 2010 | Simplex Kaba Ilco Unican 1000 keyless...

Not finding what you are looking for?

View Most Popular

Kaba Ilco Unican 1000 keyless lock

Locks & Locksmithing

Ineed a spanner wrench, so I can change the code of my Kabe 100 digital lock. Can you help? Thank You Brian

Simplex Kaba Ilco Unican 1000 keyless lock

Open Questions:

0 Answers

taking off unican 1000 off the door without key or combination but with door in open position lock is about 15 years old or more

Jun 16, 2016 | Simplex Kaba Ilco Unican 1000 keyless...

0 Answers

lock interrogation problems lock interrogation missing last 20 days on report. I have tried multiple fdu's. missing report on july 20th until august 12th.

Aug 12, 2015 | Simplex Kaba Ilco Unican 1000 keyless...

0 Answers

After entering the code and opening the door the code does not reset and you can open the latch without re-entering the combo, can this be fixed? when you release the handle after opening the door the handle does not rotate left automatilcally. You have to turn the handle all the way left in order to reset the combo and secure the door.

Feb 12, 2015 | Simplex Kaba Ilco Unican 1000 keyless...

0 Answers

Reset the authorization key for front desk unit 780

Sep 27, 2014 | Simplex Kaba Ilco Unican 1000 keyless...

See all Simplex Kaba Ilco Unican 1000 keyless lock Questions

Ask a Question

Usually answered in minutes!

Are you a Simplex Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Simplex Kaba Ilco Unican 1000 keyless lock ? Or just drag it here!

I am trying to change the code on my 1000 lock but do not know what a spanner wrench looks like? i just started this job and dont seem to have all the things i need to change the code.

1 Answer

Coaltowner

Add Your Answer

Attachments: Added items

Related Questions:

Ineed a spanner wrench, so I can change the code of my Kabe 100 digital lock. Can you help? Thank You Brian

We are trying to change the code on the Simplex 1000 Series door lock; however every time we turn the outside door counter clock wise and it is supposed to lock in position it does not and we can't...

I have a Simplex Kaba Ilco Unican 1000 keyless lock and I want to change its password. But I don't know how to do it. Is there anybody to help me? It's urgent please...

Hi, I have an older version of the Ilco unican corp pistol safe. IT is a simplex with the push buttons and a silver turner. I got it open, but don't know how to re program the code. Any help?

We have a Simplex LL101126D41 Combination lock and tried to change the code following the instructions for an earlier model (on that does not have the handle). Now the lock will not recognize the new nor...

Lost code for 5 number lock

We are trying to change our code for ILCO, Unican Corp. keyless lock, serial # 743660000, model # 201049 USA (think it is model #) It appears we have lost the default code, how do we find a default code. ...

Need to know how to reprogram the code on a Simplex Kaba IIco Unican 1000 keyless lock

I NEED TO RESET THE SIMPLEX 5 BUTTON LOCK, BUT I DON'T REMEMBER THE CODE, HOW DO RESET IT???

I need a kaba ilco spanner wrench to change the combination on a 1000 series lock. where do i get it?

Not finding what you are looking for?

Kaba Ilco Unican 1000 keyless lock

Ineed a spanner wrench, so I can change the code of my Kabe 100 digital lock. Can you help? Thank You Brian

Open Questions:

taking off unican 1000 off the door without key or combination but with door in open position lock is about 15 years old or more

lock interrogation problems lock interrogation missing last 20 days on report. I have tried multiple fdu's. missing report on july 20th until august 12th.

Reset the authorization key for front desk unit 780

Related Topics:

Ask a Question

Top Simplex Locks & Locksmithing Experts

Brad Brown

Real Cool

Chris Walker

Are you a Simplex Lock and Locksmithing Expert? Answer questions, earn points and help others

Manuals & User Guides

I am trying to change the code on my 1000 lock but do not know what a spanner wrench looks like? i just started this job and dont seem to have all the things i need to change the code.

1 Answer

Coaltowner

Add Your Answer

Attachments: Added items

Related Questions:

Ineed a spanner wrench, so I can change the code of my Kabe 100 digital lock. Can you help? Thank You Brian

We are trying to change the code on the Simplex 1000 Series door lock; however every time we turn the outside door counter clock wise and it is supposed to lock in position it does not and we can't...

I have a Simplex Kaba Ilco Unican 1000 keyless lock and I want to change its password. But I don't know how to do it. Is there anybody to help me? It's urgent please...

Hi, I have an older version of the Ilco unican corp pistol safe. IT is a simplex with the push buttons and a silver turner. I got it open, but don't know how to re program the code. Any help?

We have a Simplex LL101126D41 Combination lock and tried to change the code following the instructions for an earlier model (on that does not have the handle). Now the lock will not recognize the new nor...

Lost code for 5 number lock

We are trying to change our code for ILCO, Unican Corp. keyless lock, serial # 743660000, model # 201049 USA (think it is model #) It appears we have lost the default code, how do we find a default code. ...

Need to know how to reprogram the code on a Simplex Kaba IIco Unican 1000 keyless lock

I NEED TO RESET THE SIMPLEX 5 BUTTON LOCK, BUT I DON'T REMEMBER THE CODE, HOW DO RESET IT???

I need a kaba ilco spanner wrench to change the combination on a 1000 series lock. where do i get it?

Not finding what you are looking for?

Kaba Ilco Unican 1000 keyless lock

Ineed a spanner wrench, so I can change the code of my Kabe 100 digital lock. Can you help? Thank You Brian

Open Questions:

taking off unican 1000 off the door without key or combination but with door in open position lock is about 15 years old or more

lock interrogation problems lock interrogation missing last 20 days on report. I have tried multiple fdu's. missing report on july 20th until august 12th.

Reset the authorization key for front desk unit 780

Related Topics

Related Topics:

Ask a Question

Popular Questions

How do I remove a

Need instructions on changing combo

We have 2 front desk units Kaba ilco 780A1, one of

Lost code for keyless unican lock

How to reset grand master keys front desk unit 780

Top Simplex Locks & Locksmithing Experts

Brad Brown

Real Cool

Chris Walker

Are you a Simplex Lock and Locksmithing Expert? Answer questions, earn points and help others

Manuals & User Guides