Question about Canon (6981A002AA) for imagerunner 2200, 2800, 3300 Print Server
Fixing film rotation error
An error in the rotation of the fixing film is detected.
The reading of the main thermistor is 100°C or higher and, in addition, the
fixing film sensor does not detect the rotation of the film for 6 sec or more
while the fixing motor is driven.
Main cause: The fixing film sensor (PS45) is faulty. The DC controller PCB is faulty.
Caution: To clear the error, execute the following in service mode:
Are the wring and the connectors connected securely?
DC controller PCB (J311) <-> relay connector <-> fixing film sensor
NO: Connect the wiring and the connectors.
2. Fixing film sensor
Check the fixing film rotation signal.When the fixing motor is rotating, is
the film rotation detection signal sent by the fixing film sensor to the
concoctor J311 of the DC controller PCB?
Film rotation detection signal: 5V pulse signal between J311-A9
(FILM_ROT_D) and J311-A8 (GND); at intervals of 100 msec ON and 440
NO: If the fixing film is normal, replace the sensor.
3. Fixing film unit, DC controller PCB
Is there a fault in the fixing film edge rotation detection mechanism?
YES: Replace the fixing film unit.
NO: Replace the DC controller PCB.
Posted on Feb 12, 2011
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Nov 05, 2015 | Office Equipment & Supplies
Oct 06, 2014 | Canon gpr-6 ir 2200/2800 drum...
Nov 16, 2010 | Canon imageRUNNER 3300 All-In-One Laser...
Nov 02, 2010 | Office Equipment & Supplies
Aug 11, 2010 | Canon imageRUNNER 2200
Apr 16, 2010 | Canon (6981A002AA) for imagerunner 2200,...
Apr 29, 2009 | Office Equipment & Supplies
Jan 28, 2020 | Smart Computers & Internet
3,287 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: