Programing numbers to dail

No you can't lose all that you have in memory, but that is not the solution to your problem.try to dail the number you want to store or save on your phone then stop the dailing the number click on the number you dail again and go to option when you click on option it will bring some list for you click on save then type the name and save the number is there already.

Hi,

To OFF the dail lock follow the below steps,

Menu > Dail lock > Enter the password that you entered whole you swited ON the dail lock > Press Save > Press YES > 'Dial lock OFF' will be displayed > Press OFF

If you forget the Password please consult your nearest Panasonic Service center .

Thank You

1. FYI, when your call is dailed through successfully - please pay attention as there are two instructions on the screen. It tells you to press which button for dailing and which to press to unlock the screen.

2. To answer your question: On the left hand side of the phone, there are 3 buttons. Press the button at the bottom below the volume up & down buttons. The dailing screen should come up.

This button is also used as a shortcut for changing profiles quickly in the main screen.

You have to setup a group Dial.First setup yur one touch dail numbers under user mode-Tel registration,one touch speed dails.Leave at least 1 dail open and program it to a group dail number.Under usermode-tel registration select group dail and select your group from the one touch buttons.

Fist you have to insert the 1 touch speeddail number for each clint-if I remember correctly there is 72 one thoutch speed dails keep one touch speeddail number open for group dailing.Then you program this clints into the groupdail list for the button you selected.

On that phone, press PROGRAM the button and dial 01 STORE.

Press program again to exit programming.

It's not likely you'll be needing the Group Log In/Out button.

Carl

sir i forget nolia n72 mobile phone setting code .phone memory is already full no any missed call dailed number show in mobile.so i want that solve my problem please

All the numbers saved in group dail,are separatly saved in the one touch speed dails,you have to locate that fax number in one touch dails and change it there.

http://www.vtechphones.com/vtechui/support/manual.cfm?manualID=373

Dear rugrats

Please find below the direct download link to the user manual of the V360 phone (PDF file - 5.4Mb Download)

http://www.motorola.com/mdirect/manuals/V360_9495A85B.pdf

At page 45 & 46 you will find detailed information on how to setup the speed dial function of the phone.

Regards
Please don’t forget to rate this solution if it was helpful, it keeps us going!