Clock Setting Procedure (digital clock page 242 of your owners manual)
1. Press and hold the time button until the hours blink.
2. Adjust the hours by turning the right side Tune/
Audio control.
3. After the hours are adjusted, press the right side
Tune/Audio control to set the minutes. The minutes will
begin to blink.
4. Adjust the minutes using the right side Tune/Audio
control.
5. To exit, press any button/knob or wait 5 seconds.
SETTING THE ANALOG CLOCK (page 238 of your owners manual)
To set the analog clock at the top center of the instrument
panel, press and hold the button until the setting is
correct. The clock will adjust slowly at first and then
quicker the longer the button is held.
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
I can set the hours okay, but when I try to set the minutes, it just resets the hour again. The minutes never blink. do you know what is wrong?
The minutes don't blink after pressing the tune/audio control button?
That's right, they never blink, it just keeps reverting back to the hour.
×
3,486 views
Usually answered in minutes!
×