How to set code - Schlage Camelot Deadbolt Keypad, Satin Nickel #BE365VCAM619

RCA universal remote have no set-up code to this set. Try any other brand remote control. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.

Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes preset
with a lock code of 0000 You may change the code to any four-digit number you wish. To
change the lock code, follow the steps below.
Press the MENU button
To "Initial Setup"
To enter
To "Set Lock Code"
To operate (Password input screen will appear)
Enter the password by using the 10 button
keypad
The Set Lock Code screen will appear
To set the password, use the 10 button keypad
Press the OK button to finish your lock code is now set

find key
guard code of nokia 1280

This is copied directly from the manual - check out #5 at the bottom.
Hope it helps!

7.7 Security

The Security menu allows you to

secure the phone electronically.

1. Open the flip and press

[MENU]

2. Press Settings & Tools.

3. Press Phone Settings.

4. Press Security.

5. Enter the four-digit lock code.

The lock code is the last 4 digits

of your mobile phone number if

it is set. The lock code is the last

4 digits of your MEID if your
mobile phone number is not set.

Nokia Mobile Sets Secret Codes
Mobile Set: All Nokia Mobile Sets

Use For: Default Security Code.

Code: 12345



Mobile Set: Nokia Mobiles

Use For: Turn On Enhanced Full Rate Codec.

Code: *3370#



Use For: Turn Off Enhanced Full Rate Codec.

Code: *#3370#



Use For: Turn On Half Rate Codec.

Code: *4720#



Use For: Turn Off Half Rate Codec.

Code: *#4720#



Use For: Show Software Version.

Code: *#0000#



Use For: Also For Show Software Version.

Code: *#9999#



Use For: Show IMEI (International Mobile Equipment Identity).

Code: *#06#



Use For: Show Lock Status of Your Nokia Mobile Set.

Code: #pw+1234567890+1#



Use For: Show Lock Status of Your SIM.

Code: #pw+1234567890+4#



Use For: Show Security Code of Your Mobile Phone.

Code: *#2640#



Use For: Reset Game Score And Timer.

Code: *#73#

Samsung Mobile Sets Secret Codes
Mobile Set: All Samsung Mobile Sets

Use For: Show IMEI (International Mobile Equipment Identity).

Code: *#06*


Mobile Set: Samsung 811

Use For: Unlock code / Change roaming code / ID.

Code: 47*869#08#9


Mobile Set: SGH-600 , SGH-2100

Use For: Show Software Version.

Code: *#9999#



Use For: Show Software Version (instructions).

Code: *#0837#



Use For: Show Serial Parameters.

Code: *#0001#



Use For: Activates the smiley when charging.

Code: *#9125#



Use For: Battery status (capacity, voltage, temperature).

Code: *#9998*228#



Use For: Program status.

Code: *#9998*246#



Use For: Change Alarm Buzzer Frequency.

Code: *#9998*289#



Use For: Debug screens.

Code: *#9998*324#



Use For: Watchdog.

Code: *#9998*364#



Use For: EEPROM Error Stack - Use side keys.

Code: *#9998*377#



Use For: Trace Watchdog.

Code: *#9998*427#



Use For: Change LCD contrast - Only with version G60RL01W.

Code: *#9998*523#



Use For: Memory status.

Code: *#9998*636#



Use For: Jig detect.

Code: *#9998*544#



Use For: SIM File Size.

Code: *#9998*746#



Use For: SIM Service Table.

Code: *#9998*77

Hi aureliogovea

Please everyone that comes across my info take a few seconds of your time to rate my solution which you can select at the bottom of my answer Was this solution helpful? YES or NO :)... As i have taken time to answer your question the best i can Thank You......



If children use your Xbox console, you can set a pass code to control access to features and options. Because Family Settings exist for both the console and for Xbox LIVE accounts, you can set pass codes for both.
Here you can learn how to:

• Set an Xbox LIVE Pass Code
• Set a Family Settings Pass Code
• Reset a Forgotten Pass Code

Set an Xbox LIVE Pass Code
When you set an Xbox LIVE pass code for your profile, anyone who wants to use that profile will need to enter the pass code before signing in to Xbox LIVE.
To set an Xbox LIVE pass code:

1. Go to My Xbox and open your profile.
2. Select Manage Account, Xbox LIVE Pass Code.
3. Enter a four-button code using the X andY buttons, triggers, bumpers, and directional pad on your controller.
4. Confirm your code by entering it again.

To reset your pass code, repeat this procedure at any time. (You will have to enter your original Xbox LIVE pass code before you can create a new one.)


Set a Family Settings Pass Code
When you create a Family Settings pass code, anyone who wants to change family settings on your console will need to enter the pass code first.
You can also use your Family Settings pass code to override game and movie settings if you (or those with whom you share your pass code) want to play games or watch DVD movies that your console settings normally block.
For example, you could give the pass code to your 18-year-old so that she can watch R-rated movies that your younger child is not allowed to see.
To set a pass code for your console:

1. Go to My Xbox and open System Settings.
2. Select Family Settings, Console Controls.
3. Select Set Pass Code.
4. Select Pass Code, then enter a four-button code using the X and Y buttons, triggers, bumpers, and directional pad on your controller.
5. Confirm your code by entering it again.
6. Choose a pass code reset question.
7. Select Pass Code Reset Answer and enter your answer using either your Xbox 360 controller or a standard USB computer keyboard plugged into a controller port on your console.
8. Select Done from the Set Pass Code screen, then select Done once more from the Console Controls screen. When prompted, select Yes, save changes to put your new settings into effect.

To reset your pass code, repeat this procedure at any time.
Reset a Forgotten Pass Code
To reset your pass code after you've forgotten it:

1. Go to My Xbox and open System Settings.
2. Select Family Settings, Console Controls.
3. Enter an incorrect pass code.
4. You'll be told that your pass code is incorrect. SelectReset pass code.
5. You'll then be shown your pass code question and asked to answer it.
6. Set a new pass code, following the directions in the previous section.

If you've forgotten the answer to your pass-code reset question as well as your pass code, call Xbox Customer Support at 1-800-4-MY-XBOX (1-800-469-9269).

Programming a personal entry code The factory set code cannot be reprogrammed but you can create your own 5 digit personal entry code. When pressing the controls on the keypad, press the middle of the controls to ensure a good activation.
Up to three personal entry codes may be programmed to the vehicle. To create your own personal entry code:

• 1. Enter the factory set code.
• 2. Within five seconds press the 1-2 on the keypad.
• 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other.
• 4. Press 1-2, 3-4 or 5-6 to indicate which of the three personal entry code positions you wish to use.
• 5. The doors will again lock then unlock to confirm that your personal key code has been programmed to the module.

Tips:

• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.
• The factory set code will work even if you have set your own personal code.
• If you program a code to a position that already contains a set code, the previously-set code will be erased.

Erasing personal code

• 1. Enter the factory set 5 digit code.
• 2. Within five seconds, press the 1-2 on the keypad and release.
• 3. Press and hold the 1- 2 for two seconds. This must be done within five seconds of completing Step 2.

All personal codes are now erased and only the factory set 5 digit code will work.

Good luck (remember commend and rated this).

Up to three personal entry codes may be programmed to the vehicle. To create your own personal entry code:

• 1. Enter the factory set code.
• 2. Within five seconds press the 1 � 2 on the keypad.
• 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other.
• 4. Press 1 � 2, 3 � 4 or 5 � 6 to indicate which of the three personal entry code positions you wish to use.
• 5. The doors will again lock then unlock to confirm that your personal key code has been programmed to the module.

Tips:

• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.
• The factory set code will work even if you have set your own personal code.
• If you program a code to a position that already contains a set code, the previously-set code will be erased.

Erasing personal code

• 1. Enter the factory set 5�digit code.
• 2. Within five seconds, press the 1 � 2 on the keypad and release.
• 3. Press and hold the 1 � 2 for two seconds. This must be done within five seconds of completing Step 2.

All personal codes are now erased and only the factory set 5�digit code will work.

Programming a personal entry code and keypad association to
memory seats and mirrors (if equipped)
To create your own personal entry code:
1. Enter the factory set code.
2. Within five seconds press the 1 • 2 on the keypad.
3. Enter your personal 5-digit code. Each number must be entered
within five seconds of each other.
4. To associate the entry code with a memory setting, enter a sixth digit
to indicate which driver should be set in a memory recalled by the
personal entry code:
• Pressing 1 • 2 recalls Driver 1 settings.
• Pressing 3 • 4 recalls Driver 2 settings.
• Pressing other keypad buttons or not pressing a keypad button as a
sixth digit does not set a driver and will not recall a memory setting.
Note: The factory-set code cannot be associated with a memory
setting.
5. The doors will lock then unlock to confirm that your personal keycode
has been programmed to the module.
Tips:
• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.
• The factory set code will work even if you have set your own personal
code.
Erasing personal code
1. Enter the factory set 5–digit code.
2. Within five seconds, press the 1 • 2 on the keypad and release.
3. Press and hold the 1 • 2 for two seconds. This must be done within
five seconds of completing Step 2.
All personal codes are now erased and only the factory set 5–digit code
will work