Remote code for Akai 37" lcd with Dish Network

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts. .

Not likely the Dish remote will have that remote code at all in it--some of those sets were made by Samsung so try those codes also.

Hi my name is Mike Houston of DISH Network and I see youwant to program you're Akai TV to our DISH Network remote. There are some easysteps to allow setup to your TV and I will send the link, http://www.dishnetwork.com/SupportSection/remote-setup.Please select the receiver you have and it will take you to a help page. I willsend a link for a Power Scan and the power scan will find the remote code foryou; http://www.dishnetwork.com/SupportSection/power-scan-instructions.If you have any questions or concerns please e-mail me at [email protected].

We're happy to help you with getting your DISH Network remote addressed to your TV. We're going to start by pressing and holding the TV button on the top of your remote until all mode button back lights come on, and then release. Use the number buttons to enter the codes for your Vizio TV; here are some of the codes we currently have: 505, 598, 627, 520, and 627. Press the pound (#) button to save the code in your remote. To check that the code works try several different functions on the remote to make sure it will properly operate the TV. Remember that some codes may not be compatible with your equipment. If this is the case, try the other codes listed for your Vizio TV until you find one that is compatible with it.

We hope this helps and thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

I recently bought a used LCT2060 that had no remote. I figured my comcast cable remote would work without a problem but it didn't. So 3 universal remotes later I found my solution...a radio shack universal gamer remote. It controls up to 5 components plus your xbox360, playstation and pc. The price on sale was a mere 12.97, not bad if you ask me. Hope this helped. The code that worked for the Akai was 11676. Take care...

Viore is a generic of Samsung brand TV's. Try using their list of codes, the code for mine was 0085. Hope it helps 8-)

I recently bought a used LCT2060 that had no remote. I figured my comcast cable remote would work without a problem but it didn't. So 3 universal remotes later I found my solution...a radio shack universal gamer remote. It controls up to 5 components plus your xbox360, playstation and pc. The price on sale was a mere 12.97, not bad if you ask me. Hope this helped. The code that worked for the Akai was 11676. Take care...

You need to contact dish network to get a manual for remote control. Each TV brand has one or more codes that will allow you to power TV on or off, and adjust volume. Since Dish Network uses a specific remote to operate that particular receiver you will need them to either send out a technician to program for your TV, or send you a new remote that has a manual. Allowing you to do the setup yourself..Good Luck

Akai support 216-454-0864 .I have the same problem and called the support phone. The answer is this TV came without a code programmed in it.

all in one

I’m happy to assist further over the phone at https://www.6ya.com/expert/james_1cb31da1bc8c6102