I do not know when to take out the kneading paddle out of the breadman TR555LC. If not taken out, the Kneading paddle will stay in the bread itself after bake.

Found your breadman TR500 paddle at the following site
Hope this helps
http://www.bonanza.com/listings/Kneading-Blade-Breadman-TR500-Trillium-Bread-Maker-Machine-Part-TR-500/140971587

The Breadman Model TR888 uses the very same kning blade paddle as your Toastmaster Model 1185.

Click here:

http://www.directpartsandproducts.com/tr888-kneading-paddle-p-8818.html

Hope this helps!

I just purchased this 2 days ago and started to use it. I noticed the bread pan would wobble and was noisy during the kneading cycle. On the second use the paddle came off during the kneading cycle. Being a service technician all my life, I started to analyze the problem. I was previously surprised how loose the bread pan fitted into the bread maker and suspected there should be something to support the pan and hold it in place. I could not see anything obvious, but after looking carefully I noticed spring clips on the bottom of the bread pan, and also mating spring clips in the bottom of the bread maker. If I pushed the bread pan down fairly hard into the bread maker the bread pan would snap firmly in place. This stopped the wobbling during the kneading cycle and the paddle coming off. I could not find anywhere in the manual where it explained the bread pan must be pushed firmly down into place until it snaps in. The manufacturer should explain this to their customers on their website.

My bread pan is not too bad, but my kneading paddle is rather beat up, so I kept searching online and finally found a site ABTECPARTS.com that had the kneading paddles so I ordered two. Hopefully that will take care of my problem. It helped that I found out accidentally that the same paddle (part # 20274) fits three other Breadman machines (TR2200, TR220-C, & TR2200--97) so I just kept searching and about 2 a.m. I found this site. I hope this will help others looking for paddles.

Call Breadman Products 1-800-223-9054.
I had the same problem and they solved it.
Sincerely
Maria Kalotay

Sounds like you might need a new belt. If it works ok with nothing in it but wont when the dough is in there

HI
Go here for spares

https://secure.prodregister.com/prodprotect/applica/bm.shtml

It mixes the dough. All you do is put the ingredients into the bread maker, turn it on and wait. It will do all the work for you.

I lost the kneading paddle - called the customer service number and they told there are none available and they are no longer making them.  Guess I just throw the whole unit in the garbage since it is worthless without a kneading paddle!!

http://www.megaheart.com/pdf/breadman_op_manual_TR555.pdf

If any parts are missing or defective,
DO NOT return this product.
Please call our Consumer Service Department for assistance.
800-233-9054 Monday - Friday 8am - 5pm CST