My 35000 Reddy heater has a two foot flame coming out of it how can I fix it

The electrodes might need cleaned. I am attaching a link, please check out the FAQ section, then scroll down and click on FAQ for spark plug heaters. I hope this helps. Reddy Heater Parts Sales Online Mr Reddy Heater Parts Master Heater Parts...

The flicker and sputter is usually a sign that the unit and more specifically, the fuel nozzle needs cleaning. Anything that would cause restricted air flow, needs to be removed.

In case you have misplaced your Owners Manual, I have included a link to it. You can download and print it for future reference, if you like.

http://www.desatech.com/manuals/Construction%20Heaters/099549-01.pdf

Hope this helped you to troubleshoot and solve the problem. Please let me know.

Hi,

Here are a couple of tips that I wrote that tell you how to troubleshoot a Torpedo or Reddy heater...

Reddy Heater - Troubleshooting Torpedo Heaters

Torpedo Heater Pump Pressure Adjustment

heatman101


]-]-]-]-]-]-]-]-]-]-]-]-]-]-]-]-]-

Hi,

Here are a couple of tips that I wrote that tell you how to troubleshoot a Torpedo or Reddy heater...

Reddy Heater - Troubleshooting Torpedo Heaters

Torpedo Heater Pump Pressure Adjustment

heatman101

I would venture to say that it is the thermocouple not picking up signal to keep the gas valve open. You can try cleaning the bulb end with steel wool and positioning it in the flame remember the hottest part of the flame is out on the end.

no. the flame should be behind the cone. If it passes the cone, this means that there is too much air. simply turn the air pressure screw until the flame no longer comes beyond the cone.

this have a flame controler, if the flame didn't goes on in few seconds the unit automatically stops. back plug and start again, if not star after tree times check the flame control thermocuple, or get the unit in service to fix it.

flame sensor clean with steel wool usually right next to hsi should fix.

Hi,
Here are a couple of tips that I wrote that tell you how to troubleshoot aTorpedo or Reddy heater...

Reddy Heater - Troubleshooting Torpedo Heaters Torpedo Heater Pump Pressure Adjustment
heatman101

AIR MIXTURE ADJUSTMENT IS CRITICAL ON ALL GAS BURNING HEATERS. SOUNDS LIKE YOU HAVE INSUFFICIANT CUMBUSTION AIR WHICH WILL CAUSE A WHITE AND LAZY FLAME .... FLAME SHOULD BE BRIGHT BLUE WITH NO WHITE OR YELLOW TIPS ON THE FLAME.