Belkin N150 Enhanced Wireless Router wireless router (S7506885) Logo
A
Anonymous Posted on Jan 22, 2011
Answered

The connection to the internet drop every 30 min. for seconds then it connect again. Version Info LAN Settings Firmware Version 2.00.16 (Sep 4 2009 08:03:51) LAN/WLAN MAC 00-22-75-F4-92-FC Boot Version V0.03 IP Address 192.168.2.1 Hardware F6D4630-4 v2 (01) Subnet Mask 255.255.255.0 Serial No. 12938463011171 DHCP Server Enabled(0 LAN, 4 WLAN Clients) Internet Settings Features WAN MAC Address 00-22-75-F4-92-FD Firewall Settings Enabled Connection Type PPPoE SSID Belkin_F492FC WAN IP 86.60.26.249 Security WPA/WPA2-Personal (PSK) Subnet Mask 255.0.0.0 UPnP Enabled Default Gateway 212.93.193.40 Remote Management Disabled DNS Address 212.93.192.16 WPS Enabled ADSL Type Interleave Path Status SHOWTIME Downstream Upstream Data rate(Kbps) 2360Kb 284Kb Noise Margin 24 41 Output power(dBm) 125 175 Attenuation(dB) 47 19

Answer This Question

1 Answer

Rakesh Warrier

Rakesh Warrier

Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

  • Master 708 Answers
  • Posted on Jan 22, 2011
Rakesh Warrier
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

Joined: Jan 07, 2010
Answers
708
Questions
0
Helped
209571
Points
1609

It Seems like it is an issue with the firmware

Click here to download the latest firmware

  • Marcius Tribelhorn Apr 27, 2011

    I get the following: Upgrade file is not the correct type or version for this device. Upgrade failed. Please obtain the correct file and try again

    and my firmware and model number is: Version Info LAN Settings
    Firmware Version 2.00.16 (Sep 4 2009 08:03:51) LAN/WLAN MAC 00-22-75-F4-3F-D6
    Boot Version V0.03 IP Address 192.168.2.1
    Hardware F6D4630-4 v2 (01) Subnet Mask 255.255.255.0

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0answers

My Samsung tv model UA32F4500AK connects to the internet with a LAN cable but does not connect to the server.
Read full answer
Be the first to answer Jun 26, 2019 • Samsung Televison & Video
tip

How to configure Netgear WGT624 v3 router with Globe Broadband Huawei B200...
1. You have to reset your router to its original factory configuration by using the reset button at the back of the router (WGT624 v3) near the antenna. 2. Connect the cable from the Globe Broadband Huawei B200 modem to the wan port of the router. 3. Connect another cable (RJ45) from the router (any Lan port on the router) to the laptop or desktop. 4. Switch on both device (modem and router). 5. Wait till both device boot up and the modem flash a blue, green and yellow color on its led and solid green to all router indicator led except the test led indicator flashing for a few seconds only.
6. Open your browser (e.g. Mozilla Firefox, Safari...) 7. Type http://192.168.1.1 at the address bar. 8. Netgear setup website will open. 9. Go to advance settings. 10. Go to back up menu and click erase to reset your router to its original factory settings. 11. Logout. 12. Switch off the device (modem and router). 13. Remove the cable connecting the computer and the Lan port of the router. 14. Connect the modem directly to the laptop using the cable. 15. Open a browser. 16. Go to the netgear website. 17. Go to the Support menu on the Netgear Website. 18. Type the model of the modem (WGT624 v3) on the blank space provided (Find your product). 19. Go to Downloads. 20. Download WGT624v3 Firmware Version 2.0.26_1.01 NA. 21. Read the instruction how to download the firmware and how to upgrade your router to the new firmware. 22. Save the downloaded firmware. 23. Exit the Netgear Website. 24. Switch off the modem. 25. Now follow the instructions #2 to #8. 26. Go to "Upgrade the Router" menu. 27. Upload the downloaded firmware to the router. 28. After uploading the firmware go to the Basic Settings Menu or use the Smart Wizard Menu to configure your Router.(Important Updates: Lan IP Address will be changed automatically to 10.0.0.1). Automatic internet connections will be tested by the network. 29. Configure your wireless settings. Logout. 30. Reboot all the devices and the laptop/desktop. 31. Follow the sequence when rebooting. (modem-router-laptop/desktop). 32. Open a browser and browse any website. 33. Enjoy.
Read full tip
on Jul 12, 2010 • Computers & Internet
1helpful
1answer

Unable to connnect to the internet
Hi Friend,

Please follow the steps in order to resolve the issue:

1.Connect the wire (which is coming out from the modem) to the WAN/Internet port of the router.
2.Connect the computer to either of the four LAN ports of the router.
3.Turn on the router and press and hold the RESET button for 30 seconds and turn it off

for another 30 seconds and turn it ON.
4.Type 192.168.1.1 in the address bar of Internet Explorer and hit enter.
5.Leave the username blank and type admin in password.

If you have cable Internet connection then follow the steps:

6.In the setup page make sure that the Internet Connection Type is selected as Automatic
Configuration.
7.Click MAC Address Clone tab. Select Enable and click the tab CLONE. Click Save settings.

If you have DSL Internet connection then follow the steps after Step5:

6.In the setup page select PPPoE in the Internet Connection Type and enter the Username

and password provided by your Internet Service Provider. Click Save Settings.

In order to configure Wireless settings, please follow the steps:

7.Now click Wireless(to configure wireless) and fill the sections as mentioned

Wireless Network Mode:Mixed
Wireless Network Name:As per your choice
Wireless Channel-6-2.437GHz
Wireless SSID-Enabled and click Save Settings

8.Click Wireless Security and fill the sections as mentoned

Security Mode-WEP
WEP Encrypion-40/64 bits 10hex digits
Key1-Enter 10 digit password(e.g-your 10 digit telephone number) and click Save Settings

Also upgrade the Firmware of the router. You may visit the link in order to upgrade firmware

http://homesupport.cisco.com/en-us/wireless/linksys/

I hope this will resolve the issue.


Regards
Chiranjeet




Read full answer
Jun 15, 2010 • Linksys Wireless-G WRT54GS Router...
2helpful
1answer

My wrt160n keeps disconnecting for my macbook. The signal originally to the laptop is excellent. then i lose the connection and when i try to re-connect the laptop it says i do not have an internet...
Hi Friend,

Please follow the steps:

1.Connect the MAC with an ethernet cable to the either of the four LAN ports and connect the Internet wire to the WAN/Internet port of the router.
2.Type 192.168.1.1 in the address bar of the router and hit enter.
3.Leave the username blank and type admin in passowrd.
4.Click Wireless Tab and fill the sections as mentioned:

Configuration View-Manual
Network Mode:Mixed
Network Name:As per your choice
Channel Width-20MHz only
Channel-6 (if this was already selected you can change it to either 1,9,11)
SSID-Enabled and click Save Settings

5..Click Wireless Security and fill the sections as mentoned

Security Mode-WEP
WEP Encrypion-40/64 bits 10hex digits
Key1-Enter 10 digit password(e.g-your 10 digit telephone number) and click Save Settings

6.Now click Advance Wireless settings tab and fill the sections as mentioned:

Beacon Interval-75
Fragmentation Threshold-2306
RTS Threshold-2307 and click Save settings.

I would suggest you to please upgrade the firmware
Please follow the link: http://homesupport.cisco.com/en-us/wireless/linksys/
Enter the model number and click the Download tab. Then enter the version number(which you will get once u turn upside down the router) and download the firmware and save it on desktop.

7.On the router setup page click Administration and then click Upgrade Firmware.
From here upgrade firmare and turn off the router for 30 seconds. Turn it on and enjoy.

I hope this will resolve the issue.

Regards
Chiranjeet


Read full answer
Jun 14, 2010 • Linksys WRT160N Wireless Router
0helpful
1answer

I am on hughes net and my router keeps shuting down, and I half to reinstalle it at least once a week
Hi Friend,

Please follow the steps in order to resolve the issue:

1.Connect the wire (which is coming out from the modem) to the WAN/Internet port of the router.
2.Connect the computer to either of the four LAN ports of the router.
3.Turn on the router and press and hold the RESET button for 30 seconds. Turn off the router and turn it on after waiting for 30 seconds.
4.Type 192.168.1.1 in the address bar of Internet Explorer and hit enter.
5.Leave the username blank and type admin in password.
6.In the setup page make sure Internet Connection type is set to"Automatic Configuration"
7.Click MAC address clone and select Enable and then click the tab CLONE. After that click Save Settings.
8.Now click Wireless(to configure wireless) and fill the sections as mentioned

Wireless Network Mode:Mixed
Wireless Network Name:As per your choice
Wireless Channel-6-2.437GHz
Wireless SSID-Enabled and click Save Settings

9.Click Wireless Security and fill the sections as mentioned

Security Mode-WEP
Default Key-1
WEP Encrypion-64 bits 10hex digits
Key1-Enter 10 digit password(e.g-your 10 digit telephone number) and click Save Settings

10.Now click Advance Wireless settings tab and fill the sections as mentioned:

Beacon Interval-75
Fragmentation Threshold-2306
RTS Threshold-2307 and click Save settings.


11.I would suggest you to please upgrade the firmware. Please follow the link: http://homesupport.cisco.com/en-us/wireless/linksys/
Enter the model number and click the Download tab. Then enter the version number(which you will get once u turn upside down the router) and download the firmware and save it on desktop.

12.On the router setup page click Administration and then click Upgrade Firmware.
From here upgrade firmare and turn off the router for 30 seconds. Turn it on and enjoy.

I hope this will resolve the issue.


Regards
Chiranjeet




Read full answer
Jun 14, 2010 • Linksys Wireless-G WRT54G Router
0helpful
1answer

I have a second hand linksys router, but dont have the software or CD to install it, how do perform the connection to my PC? thank so much for kind help
Hi Friend,

Please follow the steps in order to resolve the issue:

1.Connect the wire (which is coming out from the modem) to the WAN/Internet port of the router.
2.Connect the computer to either of the four LAN ports of the router.
3.Turn on the router and press and hold the RESET button for 30 seconds. Turn off the router and turn it on after waiting for 30 seconds.
4.Type 192.168.1.1 in the address bar of Internet Explorer and hit enter.
5.Leave the username blank and type admin in password.
6.In the setup page make sure Internet Connection type is set to"Automatic Configuration"
7.Click MAC address clone and select Enable and then click the tab CLONE. After that click Save Settings.
8.Now click Wireless(to configure wireless) and fill the sections as mentioned

Wireless Network Mode:Mixed
Wireless Network Name:As per your choice
Wireless Channel-6-2.437GHz
Wireless SSID-Enabled and click Save Settings

9.Click Wireless Security and fill the sections as mentoned

Security Mode-WEP
Default Key-1
WEP Encrypion-64 bits 10hex digits
Key1-Enter 10 digit password(e.g-your 10 digit telephone number) and click Save Settings

10.Since it is a second hand router, I would suggest you to please upgrade the firmware
Please follow the link: http://homesupport.cisco.com/en-us/wireless/linksys/

Enter the model number and click the Download tab. Then enter the version number(which you will get once u turn upside down the router) and download the firmware and save it on desktop.

11.On the router setup page click Administration and then click Upgrade Firmware.
From here upgrade firmare and turn off the router for 30 seconds. Turn it on and enjoy.

I hope this will resolve the issue.


Regards
Chiranjeet
Read full answer
Jun 13, 2010 • Linksys Wireless-G WRT54G Router
1helpful
1answer

Intermittent internet disconnection, yet internet is fine
Please check the firmware of your router first. in most of the Wireless router the connection dropping issue is due to old firmware, also try chaning the wireless channel to 9 under the 2.4 GHz network to optimise the Wireless connection.
Read full answer
Mar 16, 2010 • D-Link Xtreme N DIR-655 Wireless Router
0helpful
2answers

Connection on again off again in 3 second
Hey ! it seems that there is a problem with the Firmware of the router.
The wireless connection is dropping.
You can try to upgrade the firmware.
Download the firmware from the support web site of the router manufacturer. and upgrade the firmware.
make sure that you will upgrade the firmware using the wired connection to the router NOT with the wireless connection.
Click Here for more info about the networking


Read full answer
Oct 07, 2009 • Linksys Wireless-G WRT54G Router
0helpful
1answer

Belkin router firmware malfunction
It is recommended to perform a hard reset after updating the firmware of the router. I guess you haven't done it that's why your connection keeps dropping. To hard reset the router, press the reset button at the back of the router for 20 seconds then unplug the power for 30 seconds and plug it back in.
Read full answer
Oct 06, 2009 • Computers & Internet
0helpful
1answer

Router gets disconnected
If you know how to open the setup page of the router, look for MTU. Normally it is set to Auto with default size of 1500. Now set it to manual and change the value to 1463 and save the changes. Power cycle the router by unplugging the power for 30 seconds then plug it back in. Observe your connection if it keeps on dropping.

Another is you need to isolate the problem if its the router or the modem. Try to connect your PC directly to your modem and observe if it does the same thing. If it does the same problem, call your Internet Provider to fix the modem.

If the problem still persist on the router after changing the MTU, try to update the Firmware of the router and hard reset it by pressing the reset button for 15 seconds then power cycle it.
Read full answer
Jul 24, 2008 • U.S. Robotics (USR8200USR8800KIT)
Not finding what you are looking for?

View Most Popular

N150 Enhanced Wireless Router wireless router (S7506885)

  • Computers & Internet

Related Question

My Samsung tv model UA32F4500AK connects to the internet with a LAN cable but does not connect to the server.

  • Samsung Televison & Video

Related Topics

1,079 views

Ask a Question

Usually answered in minutes!

Popular Questions

Wireless router does not connect to the internet

Belkin Pre-N (F5D8230-4)...

F7D2102 N300 Micro Wireless USB Adapter - Driver FOR MAC OS

Belkin N300 Micro USB Adapter...

Belkin f6d4050 v2 - how to make it work with windows 7?

Belkin N1 Wireless USB 2.0 Network...

Driver linux for belkin n1 wireless usb model F5D8051

Belkin N1 Wireless USB 2.0 Network...

Forgot my password to my belkin n1 wireless router

Belkin N1 Wireless USB 2.0 Network...

Check Out the Mobile Browsers Report
Check Out the Mobile Browsers Report

View all Fixya Reports

Top Belkin Computers & Internet Experts

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

Brad Brown

Level 3 Expert

19187 Answers

Alexander

Level 2 Expert

171 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...