Pa jumper pin no of nokia2626

Pianist
Ani Spit
Ani Pits
Ani Tips
Pain Its
Pain Sit
Pain Tis
Pains Ti
Pains It
Spain Ti
Spain It
Paints I
Paint Is
Inapt Is
Saint Pi
Antis Pi
Stain Pi
Satin Pi
Anti Psi
Anti Pis
Anti Sip
Pitas In
Pita Ins
Pita Sin
An Tipis
San Tipi
A I Pints
A In Spit
A In Pits
A In Tips
A Pin Its
A Pin Sit
A Pin Tis
A Snip Ti
A Snip It
A Spin Ti
A Spin It
A Pins Ti
A Pins It
A Nips Ti
A Nips It
A Pint Is
A Ins Tip
A Ins Pit
A Sin Tip
A Sin Pit
A Nits Pi
A Snit Pi
A Tins Pi
A Nit Psi
A Nit Pis
A Nit Sip
A Tin Psi
A Tin Pis
A Tin Sip
An I Spit
An I Pits
An I Tips
An Pi Its
An Pi Sit
An Pi Tis
An Psi Ti
An Psi It
An Pis Ti
An Pis It
An Sip Ti
An Sip It
An Tip Is
An Pit Is
Nap I Its
Nap I Sit
Nap I Tis
Nap Is Ti
Nap Is It
Pan I Its
Pan I Sit
Pan I Tis
Pan Is Ti
Pan Is It
Naps I Ti
Naps I It
Span I Ti
Span I It
Snap I Ti
Snap I It
Pans I Ti
Pans I It
Pant I Is
San I Tip
San I Pit
San Pi Ti
San Pi It
Ants I Pi
Tans I Pi
Tan I Psi
Tan I Pis
Tan I Sip
Tan Pi Is
Ant I Psi
Ant I Pis
Ant I Sip
Ant Pi Is
Pa I Nits
Pa I Snit
Pa I Tins
Pa In Its
Pa In Sit
Pa In Tis
Pa Ins Ti
Pa Ins It
Pa Sin Ti
Pa Sin It
Pa Nit Is
Pa Tin Is
Spa I Nit
Spa I Tin
Spa In Ti
Spa In It
Asp I Nit
Asp I Tin
Asp In Ti
Asp In It
Sap I Nit
Sap I Tin
Sap In Ti
Sap In It
Pas I Nit
Pas I Tin
Pas In Ti
Pas In It
Past I In
Taps I In
Pats I In
Spat I In
Apt I Ins
Apt I Sin
Apt In Is
Pat I Ins
Pat I Sin
Pat In Is
Tap I Ins
Tap I Sin
Tap In Is
As I Pint
As In Tip
As In Pit
As Pin Ti
As Pin It
As Nit Pi
As Tin Pi
Sat I Pin
Sat In Pi
At I Snip
At I Spin
At I Pins
At I Nips
At In Psi
At In Pis
At In Sip
At Pin Is
At Ins Pi
At Sin Pi

please do these mathod first.
first check antena point connect with pcb.
2nd,check pa voltage.
3rd menual searchig network.
4th,remove pa make jumper.
if not ok
then final change pa signal ic
for more information please loginto http://phonetolls.blogspot.com

samsung 2550 pa jumper salution

Please contact your service provider for a PUK code. Only they can provide that to you.

There is a jumper that resets the bios clock password etc...etc
You need to locate it 3 pin set 1 jumper and look for <norm/reset> in small white print.
Self explanitory

try this code 12345 or00000
Call the Cingular/AT&T customer service number, and have them get your PUK code. Once you enter the correct PUK, you should be able to set a new PIN.

Open the case and look for a jumper switch (usually blue or black color) labeled CLRTC or CRL. A jumper switch is a small connector connecting two pins on the motherboard. Same like the one in CD ROM drive or hard drive for selecting master or slave.
If you find it, unplug the power cable, remove the jumper. Wait 10 - 15 seconds, then put it back. Plug the power cable and try power up your computer.

Check the fuse if no reacting.the place is up the charge connector.if not work check + and - make sure not korsluiting.Good luck.

Check the jumper for the bios, it may be set for clear. (not an uncommon boo - boo). Move the jumper back to default pins.

are you talking about the jumper on the hardrive?if so if you have only 1 hardrive put the jumper on the 'cs' pins.if that doesnt work put the jumper on mas or (master).if you have 2 hardrives make sure the jumpers are on mas and the second drive on slave.hope this helps.let me know.cs means cable select