Paper jam in fuser on canon pc1080f how to to fix

If your Canon IR 2520 copier is showing a "paper jam" error message when powering on, but there is no paper in the fuser, it could be caused by a few different things:

1. A sensor problem: The copier may have a malfunctioning sensor that incorrectly detects a paper jam in the fuser. This sensor might need to be cleaned or replaced.
2. Wiring issue: There may be a problem with the wiring that connects the sensor to the main circuit board. A broken wire or loose connection could be causing the sensor to malfunction.
3. Software issue: The copier's software may have a bug causing it to display the "paper jam" error message even when there is no paper in the fuser.
4. Mechanical problem: The fuser assembly may have a mechanical issue, such as a jammed gear or roller preventing the copier from correctly sensing that there is no paper in the fuser.

It is best to have a professional technician diagnose the issue. They will be able to identify the specific cause of the problem and make the necessary repairs.
It's also important to check the owner's manual for troubleshooting options or error codes that might be displayed on the copier.
If the copier is still under warranty, it is recommended to contact the manufacturer for service.

The "paper jam in fuser" error message on a Canon IR2525 copier/printer can occur even when there is no paper physically present in the fuser. This may be caused by a sensor malfunction or a software issue. Here are a few steps you can try to troubleshoot the problem:

1. Check the fuser sensor: Make sure that the fuser sensor is properly connected and that it is not damaged or malfunctioning.
2. Check the software: Make sure that the software is up-to-date and that there are no glitches or errors.
3. Check the fuser gears: Make sure that the fuser gears are not jammed or damaged.
4. Check the fuser motor: Make sure that the fuser motor is working properly.
5. Check the paper tray: Make sure that the paper tray is properly loaded and that there is no paper jam or obstruction in the paper tray.
6. Consult the manual: Consult the manual for specific troubleshoot and service information for your Canon IR2525 model.

If your Canon IR2520 is jamming in the exit tray after initializing the machine, it could be caused by a few different issues:

• Paper tray: Make sure that the paper tray is loaded correctly and that the paper is not jammed or loaded incorrectly. Also, check if the paper tray is not overfilled or if the paper is not wrinkled.
• Pick-up roller: The pick-up roller is responsible for picking up paper from the tray and feed it to the printer. Check if it is dirty or worn out.
• Exit guide: The exit guide is responsible for directing the paper out of the machine. Make sure that it is not blocked or bent, which could cause the paper to jam.
• Fuser: The fuser unit could be malfunctioning. The fuser is responsible for heating and fusing the toner to the paper. If it is not working properly, it could cause paper jams.
• Feed rollers: The feed rollers are responsible for feeding the paper through the printer. Check if they are dirty or worn out.
• Paper jam sensor: The paper jam sensor may be malfunctioning. If the sensor is not working correctly, it may not detect a jam and the printer will continue to try to feed paper through.
• It is recommended to check the copier's manual or consult with the manufacturer's technical support to troubleshoot the problem. They may provide more specific instructions for your specific model and can guide you through the process of finding and fixing the problem.

These are general suggestions and your specific case may require different actions.
Regenerate response

perform the following steps to remove the paper jam.

1. Lift the platen unit lever and slide the platen unit.
2. Open the cartridge cover.
3. Remove the cartridge from the machine.
4. Flip the transfer guide.
5. Gently remove any jammed paper from inside the main unit.

More items...
•
May 22, 2018

PC1060 paper jam - Canon Community

community.usa.canon.com > PC1060-paper-jam > td-p


VIDEOS as well

https://www.google.com/search?q=clear+paper+jam+in+a+Canon+PC1080F%2FPC1060

..

Hi, try to print the error/jam report for service mode, in that report you can see which sensor is detecting the jam

Hello,
it can be that sesor flaper in fixing unit has an slow response or the sensor is faulty. Also it can be that this is delay jam due to worn out paper feeding roller, or faulty pressure in fixing assy.

Recommendation is to call service!

Remove the drum/toner unit and close the top,...does it still make the noise? If so, there is a paper jam in the fuser section (left side)
I also have a Canon PC900 series copier....mine does not have the automatic document feeder, however the machine is the same....If the noise persists, you will probably need to replace the Fixing (fuser) Unit drive gears (worst case senerio) perhaps you can locate the jam in the fuser and "carefully" remove without damaging the Fixing Belt....good luck

the jam is in the fuser assembly. you will have to have a technician fix this. the fuser will probably need to be replaced.

Hi usually paper jam at paper input area a or transfor section(photo drum area or fuser unit area, so you may try:
1) take out paper tray and open the cover that you can change toner cartridge there (see manual) looking for any paper inside paper input area or around the cartridge, then take out jam paper.
2) open fuser unit at paper output area ckick a locker at somewhere (see maanual) looking for any paper jam

A E002-000 is fixing unit error code. It is a power problem with the fixing unit. When you removed the paper jam did you see any piece of a blackish grey plastic pieces. If so you need to replace the fusing unit and or the upper fixing film..