At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When switched off, remove the battery cable and place an Ampere meter. If there is none or almost no current, nothing is wrong in the car. Just your battery is on its end of life.
If you find there is a current of a few ampere, try to find the consume, by pulling the fuses one by one. One at the time and replace before you pull the next one.
There could be a few reasons why your Python 4103P remote won't start your car. It could be that the battery is dead, the key is not inserted correctly, or there could be a problem with the car's ignition system.
If the car was fine last night, it's likely that one of these three things is the issue. If the battery is dead, you'll need to replace it.
If the key is not inserted correctly, make sure that it is fully inserted into the ignition. If there is a problem with the car's ignition system, you'll need to take it to a mechanic to have it fixed.
Check battery cables are correct ! Prime suspect here ! Alternator may be damaged and shorting .. Don't drive any car that will melt jumper cables ! Something very basic wrong here.
A simple jump start with battery cables should get the car started and recharge the battery. If you don't like dealing with battery cables, there are products that attach from inside the car using the cigarette lighter to jump start the car that work very well.
if the batter has a drain the starter may be at fault the starter can drain a battery with out running i would unhook the battery cables then charge the battery then i would have the starter tested.
unlock car via remote
Push and hold F button for about 8 seconds until it says setup remote on the screen
Use the aux and remote start buttons to scroll to CLOCK and then use the F button to access menu.
Hi, see if this site helps, it explains how to access the battery (who designs these things???). Let me know how it goes. http://www.ppbb.com/boards/ppbbphp/showflat.php?Board=ARCHIVES&Number=1225855
If the battery is old, it just may be bad altogether. If so, it won't accept a charge. How are you charging it? (should be done with a battery charger NOT by driving) Make sure cable connections are clean (not just on the outside, but where they contact battery) OOPS... just noticed date on your post... likely fixed already... if not do what I said. If it goes dead again, check alternator!
×