Have Telemate phone model FX9600M and want to use one touch phone dial or memory dial can you help

TRY HERE
http://www.telemate.net/products/telemate/pdf/telemate_first_steps_guide.pdf

You can get the manual here. Here's what it says about storing numbers:

Storing a Phone Number in the One-Touch Memory Locations

1. Lift the handset.
2. Press the PROG button.
3. Dial the telephone number you want to store (up to 16 digits).
4. Press the one-touch button (M1, M2, M3) where you want to store the number.
5. Hang up the handset.

Storing a Phone Number in the Two-Touch Memory Location

1. Lift the handset
2. Press the PROG button.
3. Dial the telephone number you want to store (up to 16 digits).
4. Press the MEM button.
5. Press the dial button (0 to 9) where you want to store the telephone number.
6. Hang up the handset.

Please take a moment to rate this solution if it's what you needed. Thanks for using Fixya!

One-Touch Memory
1. In the on-hook or off-hook state, press [MENU] button until the LCD
displays "STORE NUMBER."
2. Press [OK/DIAL] button, then enter the wanted number by using keypad.
3. Press [OK/DIAL] to confirm.
4. Choose the desired location M1 or M2.
5. Press [OK/DIAL] to confirm and the LCD will display "SAVE."
To dial from one-touch memory keys, lift handset or press the speaker and press the
key (M1/M2) and the number in the memory will be dialed out automatically.

In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.

If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

1. Pick up handset OR press 'handsfree' and wait for dialling tone.
2. Press 'store'.
3. Dial number you wish to put in the memory.
4. Either press 'M1', 'M2' or 'M3' to save as one touch speed dial numbers OR press 'store' again and then press any number between 0 - 9 to save two touch speed dial.
5. Replace handset and you're done.

In future if you wish to dial a one touch number then so long as you remember which button you ascribed to it you can do so with M1, M2 or M3. If it was a two touch number then you will need to press 'memory' followed by whatever number you ascribed between 0 - 9.

Hope this helps!

D. Nisbet

Hi, I found a way to get Speed Dial on the Eternity or Ultra Touch . As follows: [most of this from Phonebook/More/Settings/1 ]

1. Copy all address book entries from Sim to Phone Memory.
2. Delete all Sim Address book entries.
3. Switch Address book source to Sim.
3. Re-enter up to 99 speed dial entries in Sim, in the exact order you want them to be assigned to speed dial.
4. Switch Address book source back to Phone Memory.
From now on all numbers on the Sim will be in Speed Dial and you will view the address book from phone memory. Of course any number can be in both places.
Now to speed dial just enter 1#, 2# etc for any number in the Sim Address book. You will get to view and confirm the entry and then dial. In a way this is even better then the speed dial functions on older Samsungs, as the preview before dialing ensures you have the right speed dial entry.
I think it works fine. dk

Hi, I found a way to get Speed Dial on the Eternity or Ultra Touch . As follows:
1. Copy all address book entries from Sim to Phone Memory.
2. Delete all Sim Address book entries.
3. Switch Address book source to Sim.
3. Re-enter up to 99 speed dial entries in Sim, in the exact order you want them to be assigned to speed dial.
4. Switch Address book source back to Phone Memory.
From now on all numbers on the Sim will be in Speed Dial and you will view the address book from phone memory. Of course any number can be in both places.
Now to speed dial just enter 1#, 2# etc for any number in the Sim Address book. You will get to view and confirm the entry and then dial. In a way this is even better then the speed dial functions on older Samsungs, as the preview before dialing ensures you have the right speed dial entry.
I think it works fine. dk

how do you change GE Model 27923 2.4 GHz cordless phone from pulse dial to touch phone dial? I lost my instruction manual Thanks

One-Touch Dialing
Your phone is equipped with three .One-Touch Priority. keys for
instant dialing (m1, m2, and m3). You cannot store phone
numbers directly into m1, m2, andm3. They are only used
to dial phone numbers stored into memory locations 1, 2, and 3
on the keypad.
1. To instantly dial phone numbers stored in memory locations
1, 2, or 3, simply press m1, m2, or m3. (There is no need to
press talk, the phone will automatically dial.)
2. If no phone number was stored in memory locations 1, 2, or 3
on the keypad, pressing m1, m2, or m3 will do nothing.

I hope this helps.

Rollin CBs
Dean

the nearest manual I found is
http://www.portrobinson.net.nz/manuals/Telemate_TE1208PM.pdf
when looking for a manual for my Telemate 2000+2 set of three cordless.
Hope this helps
[email protected]