I have 1320n printer but i cannot print in network plz solve

No, the page count is not on the test page. You need the configuration page. Press the GO button and hold for 5 seconds. The yellow light will come on and you can release.

Hi,
Please change the driver to UPD (http://www.hp.com/go/upd) to PCL5
This will solve the issue

Rgds,
Nikhil

You need to disconnect the USB cable and set it up wireless on both units:
Since it is plugged into the router, it should already have an IP address.
Un-install the printer from the computers.
Then re-install the printer from the cd or from HP's website. When you get to the point where it ask you is the printer is attached to the computer or is it over the network. Choose over the net work and the software will find the printer IP and finish setting it up wireless.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Hi,

Please uninstall the current PCL driver and upgrade the same with UPD PCL5 (dont install PCL6) from http://www.hp.com/go/upd

Regards,
Nikhil

You may need to add memory to the printer so it can que the jobs. The memory is very cheap...128MB 100-pin DIMM for HP OEM# C9121A

Or...you could setup a printer server que and let the print server manage the jobs for you instead of having the printer hold the que.

hplaserjet 1320

solved?????????

plz check the ink status and try by reloading the drivers for the printer

plz try with new tonner

This seems to be a Card failure- time for a replacement? is that possible?