I have a Canon DC210, and am having a lot of problems finializing my
disc. When I go into the menu, and go to Disc Operations, it will not
let me select "Disc Initialize" (the font is in black). The camcorder
is plugged in and everything. I am trying to transfer my footage to a
computer, and any help would be greatly appreciated! Thank you.
Hi, Initially I had the same problem with the finalization process. But then i took off the battery pack and connected to the mains and immediately when i switched on the camcorder again, the ' Finalize ' button was highlighted i.e enabled. I continued with the finalization process and everything was fine. Was able to playback the mini dvd on a very cheap dvd player and also on a computer.
Also be sure to put the camcorder on play mode by sliding down the switch button to mode. You immediately notice that a little green button near play will light up
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To finalize the disk:
Select MENU --> then select: DISC OPERATIONS
then select: FINALIZE
then select: YES ... to go back to MENU
During the disk finalization, a progress bar is displayed. Close the MENU only AFTER the screen display returns to the DISC OPERATIONS menu
I have a Samsung recorder, and it requires you to "finalize" the disc before it will play on another unit. Check your manual for specifics, or look in your menu for the "finalize disk" option. Hope this helps...
1. turn it on
2. use cord.
3.move the on buttom to mode. it will show the recordings.
4. select a recording
5.press function butom. it will up bring several choices among "menu"
6. slect menu
7. it will give you all the chioces you need to title, finailize, protect and all needed to view the dvd
I think it is a problem with the camera.
We had one, couldn't finalize, exchanged that, and still the same problem.
Canon NO help whatsoever.
Even the mini disc companies that we purchased, NO help either.
We are returning this camera and going with a hard drive.
We were able to plug the camera to a DVD recorder and copy onto a full size disc.
I have a Canon DC210, and am having problem to Finalize Disc, When I Go to Disc operation menu I found Finalizing Button Disabled
any help would be greatly appreciated! Thank you
hi I have the same problem..when I tried to finalise the disc.. the font is in Black meaning that it's disabled..