Does the scotsman cm3 ice machine have a reset button?

Check the water inlet valve water seeping through valve should be running over into bin. Replace or rebuild valve. the machine should have slowed down on production of ice also.

should you have any questions, Thanks John Tripp Appliance 911
First let's look through the different service manuals. CM3 Water level sense diagnosticsDOWNLOAD
Head Pressure Control Kit - CM3DOWNLOAD
Reduce Air in CM3 ModelsDOWNLOAD
Replacement of the CM3 controllerDOWNLOAD
Service Handbook to 2007 - CM/CM3DOWNLOAD . I am here should you have any questions, Thanks John Tripp Appliance 911

First i need the model number CM3 is a controller number and is it a blue or black controller. then i will be able to help you.

your sump level control sensor is not reading the water level drop to go in harvest.you can do a self check test or replace the sensor(little blk box) could be wire harness. check to makeure your water value is leaking through

In the control card circuitry.

IT WAS LOCKED BY A TECH WHO FIXED IT AND DIDNT WANT THE UNTRAINED CUSTOMER TO MESS WITH IT (IN MOST CASES) HOLD ON FOR 3 SECS KEEP HOLDING AND PUSH OFF TWICE

rotated the ice bridge adjustment screw clockwise about a 1/8 turn in between freeze cycles. thich direction makes the ice thicker.

make sure you press the clean button let run 10 min or so then press it again.if you dont press it the second time descale will not reset.

http://www.scotsman-ice.com/?xhtml=xhtml/sct/us/en/homepage/default.html&xsl=homepage.xsl
start with this web site and click on Sales and Service. Look for you specific model manual and it will have all the install info. Hope this helps.

Remove all molex connections and check for corrosion. Clean the connections and retry.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61