I need an installation instruction booklet for a JVC DVD and VHS player with a remote control. the number at the bottom of the remote reads 076D0FO010

Remote Control Code List

www.jumboremotecontrol.com/remote_control_code_list.html
Jumbo Universal Remote Control · 8 Device ... Programing codes for the remote. If you do not see your device listed, you can use the code search feature to program the device into the remote. TV Codes ... JVC, 013,054,055,060,065,067,089.‎Guide to Programming the ... - ‎Download the Manual - ‎8 Device Learning Jumbo ...

What is the universal control remote code for a JVC television?

www.ask.com > Technology > Television & Video
JVC universal codes can also be found on the instruction sheet or manual guide that comes with the remote control or television set. If these universal codes do ...

JVC Remote Codes

remote-codes.findthedata.com/l/163/JVC-Remote-Codes
A list of TV, HDTV, DVD, Receiver, Audio, Amplifier and and VCR remote codes forJVC. images for codes for universal remote control jvc

now days dvd player comes with advace tacnoloy
u not need make vedio dvd u make to your dvd as a data dvd & dvd plyer read it isely so dont need to do vhs or vcd

volume + on remote control

Becuase this model IS a DVD player, the remote controller will not allow another of the same type. This remote can be programmed to control a TV, Cable Box, DBS tuner, and VCR. It will not control VHS or another DVD player

Hello Sharon,

Here is a link that you may find usefull.

http://www.universal-remote.net/zenith.html

Hope this helps you out.

Cheers Little Dish Fitter.

http://books.jvcservice.com/
Try this site under user manuals to find your model number. Hope this helps.

The disk must be finalized. Instructions are on page 79 of the instruction booklet for the MV5S. I can't get the manual to download from the MVC site, but maybe it will work later. Hopefully you have the manual.

///

Had the same problem on my JVC vcr/dvd combo unit.
You need to turn off the timer function. I did this by making sure my remote was in the "VHS" mode...turn the swith from TV to the right (found on the remote in the upper left corner...an then hit the "vcr" button. Then point the remote at the VCR unit and hit the No. 4 button (timer turns off). Your unit should not have the red timer displayed and you should be able to play your tapes okay.

Hope this helps.

Maby the IR codes are not compatible with the DVD recorder