E01 code on west bend slow cooker - how can I fix

Find out what the error code alludes to and rollup sleeves and .....................Could be something as simple as an open heating coil.

Hi,

Here are the instructions from the West Bend Site

http://www.westbend.com/finditem.cfm?itemid=3940

heatman101

Hi,

If you need to find parts for your West Bend slow cooker, West Bend coffee maker, West Bend Blender, West Bend popcorn maker, West Bend breadmakers, West Bend rice cooker/steamer, West Bend griddles/skillets/grills, and West Bend toasters/ovens the best place to go is www.westbend.com.

Also checkout this tip as it will help you to find what you are looking for on the website.

West Bend Kitchen Appliances Parts and Manuals

heatman101

Hi,

If you need to find parts for your West Bend slow cooker, West Bend coffee maker, West Bend Blender, West Bend popcorn maker, West Bend breadmakers, West Bend rice cooker/steamer, West Bend griddles/skillets/grills, and West Bend toasters/ovens the best place to go is www.westbend.com.

Also checkout this tip as it will help you to find what you are looking for on the website.

West Bend Kitchen Appliances Parts and Manuals

heatman101

..................

if you put something frozen or cold in it and let set for awhile without turning on then you must take it out let unit get room temp. then start it . E01 error means the unit is too cold to start.

Hold cook button in while plugging-in powercord . You might have to quickly hit the select button. If if doen't work the first time keep trying.

The E01 error message happened to me this morning. I unplugged the crock pot, held the "cook" button and plugged it back in while holding in the "cook" button. It seemed to reset itself. It is working fine now.

The site for West Bend is www.westbend.com you can read the FAQ to see if you problem is there or you can e-mail them with your problem.

1. The thermostat may temporarily lose calibration due to temperature changes resulting in an E01 error message on the display. Repeat the following steps to reset the unit.
2. 1. Unplug the unit from the wall socket for approximately 10 seconds.


3. 2. Plug the unit back into the wall socket.


4. 3. Press the POWER button once. Within one second, press the COOK button once. The unit should now be rese

1. The thermostat may temporarily lose calibration due to temperature changes resulting in an E01 error message on the display. Repeat the following steps to reset the unit.
2. 1. Unplug the unit from the wall socket for approximately 10 seconds.


3. 2. Plug the unit back into the wall socket.


4. 3. Press the POWER button once. Within one second, press the COOK button once. The unit should now be rese