Glass cover exploded in millions pieces.luckily nobody got hurt.

For heavy machinery cars etc. luckily there are many websites
that can help you repair
for eg site like reliable-sto re is very active in this.. instant help, emails and all that's fantastic

you need toughened glass as tempered glass shatters in to a million pieces if stressed , hit or dropped
toughened glass can be obtained from any repair shop as an upgrade of the glass

You could look for a used quad bike and use the engine, or you can buy a cheaper, smaller engine for it, but it won't be as fast or as powerful.

Without knowing what brand of oven and the model number, nobody is going to be able to say more than, 'replace the lamp"

Probably not. There are many reasons why tempered glass explodes. Age is the leading reason. If over time the shelf gets a tiny scratch on it, that will guarantee it will at some time fall to pieces. You don't have to replace it with expensive tempered glass either. You can get a plexiglass shelf cut to the dimension you need by finding a local glass shop that has plexiglass.

Your glass can range from 500 to 700 dollors .Ouch cost is way hi.Sorry to hear.

 Hello- You will have to find someone who has oven door glass experience. The doors are layerd ,  3 or 4 glass, 3 or 4 steel. Insulation, screws, and hinges. Local app. parts -outer glass 85$   -2 inner heat glass 75$ ea.  if going to do this, get a new door seal too. Let me know if this info helps -have more if needed. Thanks- ED

Hello In the future please post the information regarding the car to help us help you. But luckily for you, the process is pretty generic between most cars.
*****The first step is always to remove the cables from your battery as 12V DC will hurt if you touch two wrong wires*****
There is usually a plastic piece that goes around the edge of the radio, and sometimes the ac, clock, and other dash items as well. These pieces are only held in by clips, which can usually be removed by gently prying at the back of them with a screwdriver. Under this cover, there is typically four screws that hold the radio in. Once you remove them, you can slide out the radio. After that, you need to determine which wires are speaker, power, etc., so you can reconnect them to the new radio. Reconnect the wires, slide the new radio in, replace the screws, then replace the plastic cover.





Hope this helps
-Chris

need a replacement for euro-pro model no. KC 260LC, also knob and lid for small pot