Anonymous Posted on Jan 14, 2011

I need a AC/DC power adapter for my Labtec 1030 speakers. Where might I purchase such an item?

2 Answers

Anonymous

Contributor 1 Answer
Posted on May 05, 2012

Anonymous

Contributor

Joined: May 05, 2012

Answers

Questions

Helped

305

Points

These speakers need an "opposite" ("-" inside; "+" outside) power supply 15 V. Most power adaptors, (for example laptop adaptors) are "+" inside; "-" outside. They can not be used! So, I think, You need an universal power adaptor, which has a cord with invertible plug, and voltage 15 V. I hope a 1000mA (max power) maybe the best, but 500mA could be also satisfactory. (I have the same problem and seek for such an adaotor.) These remains for me a question now, if a 12 Volts adaptor would also work, as they are the most common universal adaptors.

Anonymous

Master 2,178 Answers
Posted on Jan 14, 2011

Anonymous

Master

Joined: Oct 21, 2010

Answers

2178

Questions

Helped

390351

Points

6614

Radio Shack

Anonymous Mar 24, 2011

this answer is annoying this answer is annoying

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Power requirements required are 6 volts dc at what amperage?

6V DC 200 MA; plus shell, minus center pin
aka, Panasonic AC Adapter Model No. RP-65A or equiv..

Read full answer

Nov 29, 2013 • Labtec LCS 150 Computer Speakers

0helpful

1answer

NEED TO REPLACE POWER SUPPLY

6V DC 200 MA; plus shell, minus center pin
aka, Panasonic AC Adapter Model No. RP-65A or equiv..

Read full answer

Nov 12, 2012 • Labtec LCS 150 Computer Speakers

0helpful

1answer

What is rating of Spin 50 Power Module. Lost mine

Should it be a power supply that outputs AC and converts to DC inside the speaker case, or is it a wall adapter the outputs DC straight to the built in amplifier?
Some speakers have the voltage and polarity for the plug on the back of the speaker where the power lead plugs in. As they are only small speakers of probably a couple of watts it may only need about 2 Amps or less. Higher current is fine as the amp will only use what it needs to work correctly but I would'nt go below 2 Amps.

Read full answer

May 06, 2012 • Labtec Spin 50 Computer Speakers

0helpful

1answer

Opening Labtec speakers type LCS-1030

To open these you need to pull the front grille off. There are four screws, one in each corner. You'll need to do a bit of prying to get it open as the case is sealed around the edges, but it isn't too terribly difficult. Just take your time.

Read full answer

Mar 03, 2012 • Labtec LCS 1030 Computer Speakers

0helpful

1answer

I have no power supply cord for my labtec lcs-1030 speakers- what do i replace it with? i cannot find specs for it anywhere online

On the back of one of the speakers, there will be 3 plugs; a green one, a grey one, and a black one. The black one is the power plug. Right below the power plug it says the voltage needed (I could only find one picture online, and it looks like it says 15v, which would be 15 volts). That number is the needed supply voltage, so search google for (number under plug) volt power adapter.

Read full answer

Mar 24, 2011 • Labtec LCS 1030 Computer Speakers

0helpful

1answer

Need a driver for Labtec LCS-1030 speakers

Go to Labtec.com > Support > Downloads.

Read full answer

Nov 09, 2010 • Labtec LCS 1030 Computer Speakers

0helpful

1answer

Can I connect a Labtec Model AD-SS-3 to my laptop?

This model of AC adapter puts out 14.4 Volts of DC current, at 1.0 Ampere.

I doubt that 1.0 Ampere is enough amperage to run your computer, or to recharge your computer's battery.

Look on eBay for the model-number of the original AC adapter.
You might find one from the manufacturer of your computer,
or you could find something that will be compatible in voltage/amperage.

Read full answer

Aug 19, 2010 • Labtec LCS 2414 Computer Speakers

0helpful

1answer

I need a new power supply for Labtec LCS 1030 speakers and trying to obtain specs and power plug information. Anybody have the information available?

I know this is a little late, but the power supply that these speakers use appears to be 5mm across. The output specifications are 15V DC, 1000mAh (1A), with the center pin being negative.

Read full answer

Feb 17, 2010 • Labtec LCS 1030 Computer Speakers

0helpful

2answers