I have a bravetti stick blender doitall model EP558 i dont have the intruction manual where can it get it?

You did not specify a brand or model number of your blender; however, most blender jars will lift off their power base without turning or with only very little turning motion to release them from the base. The blade assembly should NOT come off as you remove the blender jar from the power base.

Were you successful in removing the bottom ring which normally screws on to the bottom of the blender jar from the powerbase?

You should make sure you have properly attached the blade assembly for your brand/model.

The blender blade assembly should be held on to the bottom of the blender jar by the bottom ring which screws on clockwise; most will have a sealing gasket that fits between the blade assembly and the sealing surface of the blender jar to prevent any leakage while in use. It will take much more turning to unscrew the bottom ring to release the blade assembly than it should to release the bottom ring from the powerbase.

Assemble your blender jar and blade assembly and try a dry run by placing on the powerbase, giving a couple of bursts of power, and then seeing if you are able to remove without the blender ring unscrewing.

Make sure you are comfortable with the action required to remove the blender jar from the powerbase before you put in to use.

Good luck!

Hi,

For what brand and Model please?

yes you can get another manual guide in the internet as long as you know the item serial no. and the name of the brand....just go to the site of the BRAVETTI PLATINUM and type the type of model that you have it will appear you don't have to find or wait for different options.

The only manual I could find was for the Bravetti Convection and Rotisserie Toaster Oven by Euro-Pro. Here is the site: http://www.sharkclean.com/manual/K4245H_REV_0405.pdf
I hope this helps

If you were to log on to the manufacturer's web site, I think you may be pleasantly surprised as usually, if available, one is able to download, by model number, Customer Instruction Manuals, list of Dealers for spare part supplies as required.

The information is normally free of charge.

I hope this helps.

kitchen.manualsonline.com

You can get the manual on the link below. Just click where it says it is free.

http://safemanuals.com/user-guide-instructions-owner-manual/MR%20COFFEE/ECM10


Good Luck please rate 4 thumbs up for the free answer and please leave a testimonial

hi, did you find it then? we are also looking for parts for our blender of same model.

For information about Bravetti appliances, warranty and customer service support please call HSN Customer Service at 800.933.2887 (8 am-1 am ET).

We're happy to help and we appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
[email protected]
http://www.microwavedisplay.com

I need a Manual and parts list for a Bravetti K5345H Microwave-Convection Oven Please help!!!