Sentria vaccume .. Will a G3, g4, g5 model shampoo system work?

Found a guide that should be helpful! Kirby Vacuum Power Switch Repair

ll gen models are the same fittings gen 3,4,5,6,7, and sentria

Kirby G3 G4 G5 G6 Vacuum Cleaner Shampoo Shampooer Kit Carpet System... 744results for kirby g6 vacuum cleaner

1. Put the hose and see if suction is good. If it is - you may have had nozzle installed wrong or brush roll may be worn out (bristles must be sticking out of the nozzle by about 1/8 of an inch).
2. If there is no suction with the hose either - check if bag is not overfilled to the point where dirt is blocking the fill tube hole.
3. If two above are fine - something must be blocking the air passage from the fan to the bag. Check for clogs in the fill tube (tube inside the cloth bag) and mini emptor (bag bottom plastic part) and also see if there is something blocking the exhaust on the vacuum. You may not even see it so use a piece of wire.

GoodVac.com Technician
www.goodvac.com
1-800-775-6586

Here is a step by step walk through with pictures on how to replace the neutral / drive pedal on any Kirby Generation vacuum (G3, G4, G5, G6, Ultimate G, Ultimate G Diamond Edition, Sentria and Sentria II)
Kirby Neutral Drive Pedal Replacement Guide

GoodVac.com Technician
www.goodvac.com
1-800-775-6586

Changing Belt and Roller on Kirby G3 G4 G5 G6 Ultimate Diamond Sentria

I believe you called me after posting this question but for all other folks that may come across I'll repeat - ANY of following Kirby model shampooers will work - G3; G4; G5; G6; Ultimate G, Ultimate G diamond edition and Sentria.

Good feedback would be appreciated
THANK YOU

Yes, any G series shampooer will work.
Marci

Please check out my step by step instructions.....

http://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039

Hope this helps...