Question about Panasonic PT-53WX53 53" Rear Projection HDTV-Ready Television

1 Answer

LG Projection TV Model# RT-49NA11T Green color gun shows bent arc on top & bottom.Red & blue guns are ok.How to adjust the green gun to remove the bent arc. This is causing picture shows mix color bars on top & bottom of screen.I blocked each gun at atime & found that green color gun is the only one which is showing bent lines on top & bottom. Please advise how to adjust & where is the adjustment on green color gun?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Panasonic Master
  • 8,457 Answers

This problems ur tv have can't not be fix by adjustment.The tv have a problems known as convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadow pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts on the tv convergence board,must be replaced to repair the tv convergence board to solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Posted on Jan 10, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The screen is green and the tint option in the menu cannot be adjusted.


This symptom usually indicates CRT failure. Projection TV's, especially older types use 3 CRT "guns" to project the image on the screen. One is Cyan or Red, one is Green and one is Blue. If the Red and Blue become weak or do not project, the Green gun overpowers the output of the other two. These three "guns" are aligned exactly on top of each other so when all three are correctly functioning, the correct colors are projected on the screen.

Oct 04, 2015 | Televison & Video

1 Answer

Panasonic PT-47WXC43G green ONLY is bowed on bottom and top


Hi,
It still convergence chip problem, check big resistors nearby these chips that would be open or devalued and causing problem, specially in green convergence area, your green tube/ gun is just fine and just not getting convergence output signal to show correct image.
I would suggest to download service manual copy of this tv for small fee from any website and fix the issue with schematics help.
Thanks.

May 02, 2010 | Panasonic PT-47WXC43 47" Rear Projection...

2 Answers

No Red color at all. The convergence feature does not work either. Lots of green and blue RCA Model D52W59


Red color gun has failed, which will make the picture over saturated with the other two colors(blue,green) the bad news is the three color guns need to be replace in a set(all at the same time) because if you only replace the red it will over saturate the older blue, green guns then your picture will be mostly red.Unfortunently in most cases it's not worth the investment, better off to purchase a new tv. Good luck !

Nov 28, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Picture shows double with odd colors


the tv guns are missalligned.This tv relies on three diferent guns red green and blue.If these guns are corectly alligned they can make every coller in the spectrum

Jul 30, 2009 | Sony Televison & Video

1 Answer

Green picture only


The projection TV has 3 guns RED GREEN BLUE. In your case the red and the blue guns are gone. So you are getting the green color screen. You got to replace the picture tube.


Jul 25, 2009 | RCA TruFlat 27F520T 27" TV

1 Answer

My sony projection tv model # kp-46wt500 has a green and red tint. how can i fix it?


Increase the current flow to the blue color gun. If it is not adjustable it will need replaced and this is a major repair. You can try to reduce the red and green guns and increase the output transformer for a temporary fix, but save up your pennies for a replacement. Have a tech look at it before running out for a replacement because the SONY is the better model projection televisions.

Jun 28, 2009 | Sony KP-46WT500 46" Rear Projection...

1 Answer

Guns on their last leg- color fading


If you are asking about Guns in rear projection tv then answer is No.
Rear projection TV has 3 Guns (CRTs), red-green and blue and each gun has its unique color phosphorus coating to produce its mono color (red /green /blue) and these are not interchangeable.
Need further info, let me know.

Oct 23, 2008 | Televison & Video

1 Answer

54" Projection TV


Your green gun in our tv is misagligned/out of focus. Your tv uses red, green and blue guns that layer in different shades and mix to create the different colors. Your green is a little off so the colors aren't mixing right which explains the green haze and the shadows. A tv repair man can fix this problem pretty easily and it isnt expenisve.

Aug 28, 2008 | Akai PT4298HD Rear Projection Television

2 Answers

Red Screen


first try going to the menu on the tv and adjusting the red blue and green tint....if not the u need to remove the front pannel and move the the the top left knob on the setting to lower the tint...

Aug 15, 2007 | Hitachi 57S700 57" Rear Projection HDTV

Not finding what you are looking for?
Panasonic PT-53WX53 53" Rear Projection HDTV-Ready Television Logo

592 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

512 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...