Lexmark E450dn Error msg 84 Replace Photoconductor Photoconductor has been replaced same error msg. Is there something else to look for?

84 PC Life Exhausted indicates that the photoconductor unit has reached its functional life. The photoconductor kit will need to be replaced. The printer will not function so long as the Exhausted message remains on the display. The only way to clear the message is to install a new photoconductor. After replacing the photoconductor unit, you need to manually reset the pc page counter as well. Thank you for choosing Lexmark.

If you have that error on the display, you need to replace the photoconductor kit. Here's the link to the Lexmark website to guide you on how to replace the photoconductor kit: http://bit.ly/bNhXQ2. Take note of step #9 on how to reset the photoconductor counter. Hope this helps.

Here's a link to the Lexmark website to guide you on how to replace the photoconductor kit on your Lexmark E342n laser printer. Just click on this link: http://bit.ly/bh5TKi. Follow the instructions carefully. Don't ignore IMPORTANT! and NOTE messages. Hope this helps. If you need more assistance, leave a comment so I can get back to it. Thanks.

Hello,
Photoconductor is the part of the printer where the image gets created this is a very delicate and important part in the Laser printing process. If you open the printer and remove the toner, you should see it sometimes is like a green or blue color. The message 84 is just telling you that the photoconductor has reached the end of life and needs to be replace. Here is also a link on how to do the replacement http://bit.ly/bn2HFc

Instructions for resetting photoconductor count on E450

http://support.lexmark.com/index?page=content&id=HO3155&actp=search&viewlocale=en_US&userlocale=EN_US&segment=SUPPORT&productCode=LEXMARK_E450DN&searchid=1269982667366

Hi!

For step by step procedure to reset Photo Conductor counter please see the following link---

Photo Conductor Counter Reset

Please do rate this solution as FixYa and revert for further assistance.

Thanks
Rylee

i have a lexmark 352 DN; it is saying"84 replace photoconductor", and i replace photoconductor and nothing....

WHAT IS 84 REPLACE PHOTOCONDUCTOR

Reset Procedure(s)
Resetting the Lexmark E340/342 (display type) machines
1) Turn the printer off
2) While still off, press and hold the SELECT and RETURN buttons.
3) Keep both buttons pressed, and turn the printer on. Continue to hold both until either “Performing self test” or “Config menu”
appears on the display.
4) Release the two buttons
5) RESET PC CNT should now show on the display. If it does not, press the left or right menu buttons until it does.
6) Press the SELECT button once. “Resetting PC Cnt Value” should show on the display.
7) When the display shows CONFIG MENU again, turn the printer off.
8) Turn the printer back on. (Do not hold any buttons down this time). The printer is reset.
You can confirm the counter was reset by printing a “menu settings page”.

pc stands for photoconductor or print cartridge or in layman's term toner

the toner has reached its expected life or toner has ran out