Question about Hotpoint Ultima WF860 Front Load Washer

2 Answers

My Hotpoint Ultima WF860 will not spin, the drum fills up with water ok and then does nothing, the countdown timer keeps counting down until a minute left and stays there.No faults are displayed on the front.The water will drain from the machine when the cycle is cancelled. Any suggestions?

Posted by Anonymous on

Ad

2 Answers

paula

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Hi my washing machine hotpoint ultima fills with water then the timer keeps jumping back so its taking a whole day to wash then when it spins the water pours from the draw and the door its doesnt spin proprly the clothes on the bottom are soaked and they smell its like stagment water.

Posted on May 12, 2012

Ad

Appliance Guru Gold Coast QLD 4213

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 330 Answers

The belt has come off or broken on the back take lid or back panel off and have a look

Posted on Jan 10, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint ultima washing machine wma74 drum not turning


If the machine wasn't excessively noisy before and when you select spin only you can't hear the motor running its likely to be the carbon brushes in the motor worn down till they no longer contact stick a new set in if the carbon length sticking out the brass holder is less than around half an inch long

Dec 08, 2013 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Wt741 machines drum


It is possible the motor start capacitor has failed. Unless you know how to test it, call a service person.

Oct 19, 2013 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Hotpoint WF860 drum not turning. Belt checked all ok, no error codes it just fills with water and goes through the cycle filling and emptying when it should and the drum stays still. Can someone help?


ours did the same as this........ it needed a new control board after checking everything you have mentioned. it was a couple of years ago and at that time it was a hotpoint part only. but they can be picked up on ebay for around 30-40 quid.

Oct 18, 2011 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Washing machine motor not turning


hello,

what this indicate is that there have been a power disconnection from power supply on the jet string connected to the drum (drum controller)

what you will have to do to solve this problem is to unscrew the the washer then trace the wire down to the jet it is round in shape at the back of the washer
please rate this
thank you

Jul 05, 2010 | Hotpoint Ultima WF860 Front Load Washer

2 Answers

My Hotpoint Ultima keeps displaying an F10 fault and doesnt spin correctly. However, if I then switch it to a rinse and spin cycle it seems to spin OK.


F10 meanswater level pressure switch not sensing correctly, there could be a blockage in the switch hose or chamber, or the switch could be faulty.

Jan 17, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Washing machine won't spin


Do you hear the motor spinning loud whirring noise,when drum is not,if so drum belt has come off or snapped,if no noise possible brushes on motor need replacing

Jan 18, 2009 | Hotpoint Ultima WD72 Front Load...

1 Answer

WF860 drum filling with water


Normally I would think that the problem is with the drain system (faulty pump or clogged lines), but you told me that also "When the washing machine is not bein.g used the drum slowly starts to fill with water!!" therefor I think it can be a dafective inlet valve or a faulty control assembly.
In either case, you will need a technician to fix this.

Dec 23, 2008 | Hotpoint Ultima WF860 Front Load Washer

3 Answers

Wf860


may be the pressure switch, or the rubber tube up to the pressure switch blocked

Oct 21, 2007 | Hotpoint Ultima WF860 Front Load Washer

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

483 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

gbob59

Level 3 Expert

3063 Answers

Eric Taylor

Level 3 Expert

590 Answers

Richard C Cohen
Richard C Cohen

Level 2 Expert

171 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...