Color is seprating - Hitachi 50EX01B 50" Rear Projection Television

post a picture of the wiring but hot is generally black neutral is generally white ground is always green sometimes they use red blue dark yelloow purple as hot so it is hard to say which color the unit uses there are only about 3 wires maybe a 4th if it has a seprate switch for the pump but the picture of the circut would answer my questions

We liked this one since it has all antural hair, compare to the one for $100 s , I rather get this one. the color of my pouch was gold, however I wish I had a choice for pouch color. its sent to you randomly. unless you call them and ask for specific colors. beside all of these, quality is not questionable,hairs are perfectly glued to the hadnle and since last week, I dont see any sign of damage or sepration on hairs. they are very soft and trendy, I do recommend this item.

two big chips on one seprate pc board
sk_ _ _ _ _ _ ? get the number google it
cost about 10.00- 20.00 etch order them
go to raido shack get solder soldering iron
40watts and solder braid (whicket)
remove the solder pull the chips ,one
small screw holds them to the heat sink
replace with ordered parts set up
covergance Done. you just saved 300.00

1. Windows XP: Go to Start -> Run... and type cmd
2. Windows Vista: Open Start menu and type cmd
3. Hit Enter
4. Type del C:\autorun.inf /ah /as /ar.
5. Press Enter
6. Repeat steps 4 and 5 replacing the letter C with the letters of your disk partitions.

You have got some nice piece of virus. This is only temporary solution, as the virus will come back. Make sure you install some good anti-virus utility (Kaspersky recommended) and update it.

Few possibilities...
Incorrect settings in properties of printer. Software glitch, Please reinstall driver. Unplug printer for couple of minutes from AC outlet and replug back in and try.

your convergence IC;s are out, they cost about $40, if you know how to solder, you can do it your self, if not , I would try to find somone that can, service centers charge about 4 or 5 hundred, after you get the new ones, there easy to find on the board in the back of the tv

most like the amp on speakers wwent bad best u can do add seprate samsng sterio suround system or ect form dish cable box to sterio direct for tv sound or rca outs on tv if those sstill work

You need to do 2 seprate processes, convert and SEPRATELY put it on youre zen. If the conversion process is slow, dont worry. I converted a show and it took 13 hours!

yes

you have to make power in put seprate then only you can make power seprate.

thank you

convergence is tricky.. there are three seprate boards that it is split with.. do you have NO convergece at all.. could be convergence power board...one color... convergence amplifer board.. it it could be the signal board.. there's even a chance it could be a descrete fuse... shoot me some more info..