As per original notes: Camrea LCD is cracked, I

Info for Error code 105
105. (01101001) Phase 2 to 6 - Comms Error Time Out
These faults are reported when the Display Module detects an error in
the communications between the Display Module and the Motor
Control Module.
Note: If the product is an IW, the wrong Motor Control Module may
have been fitted. Replace with a compatible part.
Phase 2 to 4 and Phase 6
Primary Source: Display Module.
Action: Replace Display Module.
Secondary Source: Motor Control Module.
Action: Replace Motor Control Module.
Tertiary Source: Rotor Position Sensor (Phase 5 and 6).
Action: Replace Rotor Position Sensor. If this corrects
the fault, refit the original Display Module or
Motor Control Module.
Phase 5
Primary Source: Pump
Action: Measure resistance of pump. If resistance is
less than 33 ohms, replace pump.
Secondary Source: Display Module.
Action: Replace Display Module.
Tertiary Source: Motor Control Module.
Action: Replace Motor Control Module.
Quaternary Source: Rotor Position Sensor.
Action: Replace Rotor Position Sensor. If this corrects
the fault, refit the original Display Module or
Motor Control Module.

Hi barbaradwall,

Actually the spider web blotch that you can see on your screen is an indication of a cracked LCD. The only way that you can fix this is to have the LCD replaced by an authorized technician since special tools will be needed to open your phone and fit a new LCD.

Hope this helps.

Thank you for using FixYa.

Email a request for your part here they will give you a price and part number to order. Good luck.

[email protected]

# NOTE - If this info was helpful to anyone please click on yes!

Had the same problem myself, I purchased a new lcd from ebay (user name: ProphotoSD). He has tons of factory LCD's, cost around 90$. Please note that if you cracked the clear cover above the lcd that is a separate piece however it wont effect the lcd working (this piece is also replaceable). Then I found a simple tutorial for disassembling the camera body on google. Took me like 25 min, very simple job, just need a very small phillips head screw driver. Hope this helps!

hi, if want to buy a new lcd screen to replace, pls contact us by email [email protected]. we are a source of camera repair parts for all major brands, from www.think-tec.com you will know more about us.

The LCD screen on my Olympus fe-230 camera is cracked and I am trying to find a replacement screen to install. Any ideas where I can find one? Is this something I can replace myself

the acess code comes on anbd then it asks for me to turn the camera on and off

I don't know the replacement cost, but I can bet it is nearly the cost of your camera. You might be better to find one on ebay that has a good LCD and transplant it. It may be a little difficult, but not impossible.

Have you looked on Ebay, check with office products dealers, most have what is called junkers just for this reason...

There is no need to replace the whloe lcdscreen, you just need to replace the touch screen & panel which is a thin glasstop on the top of the lcdscreen. The whole lcdscreen is expensive, while a touch panel is much cheaper than that. And we could provide all kinds of PDA accessories. Here are some information for you In general, PDA LCD screen comprises the touch screen. LCD screen acts as a display of PDA or SmartPhone, and the likes, which cannot go without LCD screen. Touch screen is short for touch screen digitizer which seizes the upper part of PDA LCD screen. It is pressure-tactile, runs with gentle touch of stylus, finger and other tele-pointing function-possessed device. Different from LCD screen, the touch screen is an optional component for PDA, SmartPhone, and the likes. A PDA can function well even without the assembling of a touch screen for the availability of keyboard.