Isnt there built in speakers? or does it have to be hooked to a stero system? i never had a flat screen before and just inherited this,without a manual, but have remote at least. picture is great and pic in pic great, but NO SOUND.

you will need to get an amplifier to connect the t v to then connect the speakers to that and thats how you get better sound

Hi, generally when you a buy a car, the steroe and speakers are all stock fitted, if bought second hand, they may have been upgraded.
Down to your speakers, check connectors behind the steroe unit, should be 2 plugs, one for power with red, black, yellow and blue wires, and the other plug is your speakers. Check there is 8 wires into the plug.
If all is correct then check the rear of your speakers, check the connection and that the wire isnt loose.
If all is fine there must be a wire break somewhere, your stereo presets are only set to the front speakers (fade setting).

Hope this helps

how do i hook up my stero to my dynex tv? stero has no hdmi cabl neither does my cd player. i also go through my cable box not high def Thank u for any help

some cars come with a built in amp that is probably located in the rear of the car and the only you can put in an after market stero is to bypass that amp so that means that you would have to run new speaker wires to all the speakers.

Wild guess. Is the TV volume turned down and its output set to variable instead of fixed?

yes, if your flat panel has speakers built into it. just hook dvd into video input with yellow, red . & white cables. sound will come thru tv speakers that way. mch

audio out on the TV to audio in on the "home theatre system"

i to have that sub and i hook it up to my dell 1501 i use a mini steroe plug it has two input so you can hook up two device get two y cables on one end it will have a plug like your headphone plug on the other end has two male the ones you hook up at the back of your steroe the other cable is a y cable as well this one has two female end and steroe end to hook up to the sub connect both wires to become one male to female one end goes to the computer the other end the sub you cant do it wrong there is only one plug that will fit hope this helps .

If the amplifier has inputs for a high level signal, you unhook the wires going into the speaker and plug them into the amp, then hook the outputs up to the speakers. If the amp only has rca inputs, you need to also buy a line level converter. Then you unhook the speakers, hook the wires up the the converter, then hook the converter up to the amp, then hook the amp up to the speakers.

Please leave good feedback!

you can try a universal remote controller which supports your device. this is an important issue that the universal controller must have the exact remote code of your device (preprogrammed) because your remote controller is out of duty; therefore, a controller with learning capability won't solve the problem you have.