I need instructions how to connect my h350 blue tooth to my lg cu400 cell phone

yes surely you can get the unlock code for your LG model mobile,
Just visit this site Superunlockcodes.com , it provides the step by step instructions and easy methods for unlocking your mobile from the network lock......if you give your mobile details such as IMEI number, country & network lock means after that within a short period you can get the code for your mobile.....

For good place to get the unlock code for LG model, visit this site Classicunlocking.com, it provides step by step instructions and easy ways to unlock the phone lock network ....while for the unlock code you have to give some information about the mobile site that is your IMEI number, network and country lock, then in a short period you can get the code ...

you have to make sure that you set the phone to discovery mode for the blue tooth to recognize it

Sorry. Not going to happen.

first switch on ur mobiles bluetooth connection......... then switch on ur moto H350..... then it automatically ask to pair with ur mobile jst accept it........ and then enter the pass code 0000.........kkkk... then it get paired... kk.......... 

I have verified that your phone supports DUN Bluetooth profile so you should be able to use it as intended.

You need to verify though that your dongle supports DUN service profile. If it does, you may follow the instruction below for step-by-step guide:

http://www.pocketpccentral.net/help/wm_bluetooth_modem.htm

1.Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.2.Open the boom microphone and the blue light should remain on. If not, repeat step 1.
3.On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4.Select H350 once a connection is detected.
5.The passkey "0000" is now entered to confirm the connection has been made.
6.The cell phone screen will now read "Bluetooth Connection".

Tips:
1.Provided you set the Bluetooth power to "On" after the initial connection has been made, the phone will automatically re-connect to the headset.
2.To set the Bluetooth power on - Press Menu, Select Settings, then Connections, then Bluetooth link, scroll to Setup and select that. Scroll to Power and chose Change. Scroll to On and press Select. The screen should now read "Changed: Power On".
3.Test Your Connection: Close the headset and watch for cell phone to say "Disconnected". Re-open the headset and the phone should be connected automatically and will now display "Bluetooth Connected".

please give good rating if the solution works.
Thanks for using FixYa.

PUT HEADSET IN PAIRING MODE

1. Ensure the headset is turned off (indicator light not blinking and headset
boom is closed)
2. Press and hold the Call button. After about 4 or 5 seconds, the indicator
light becomes steadily lit in magenta
3. Release the Call button and immediately open the headset boom. The
indicator light remains lit in magenta.

If the indicator light is flashing in blue or not steadily lit when opening the
headset boom, repeat steps 1 through 3

Ensure that your phones blue tooth is active and looking for a new device

Yes there is a universal code. It is 0000. That is four zeros.

Hope this helps :)

Hi, follow the steps to get your product paired. Step A - PUT HEADSET IN PAIRING MODE Note: To turn off headset With the headset power off, press and hold the Call button for 6 to 10 seconds until the blue indicator light turns on and remains steadily lit. (The light will flash while you hold the Call button.) If the indicator light is flashing or does not remain steadily lit, turn off the headset and repeat step above. Step B - SET THE PHONE TO LOOK FOR YOUR HEADSET Select (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists all Bluetooth devices it finds. Select Motorola H350. Press OK or Yes to pair (link) the handsfree device. Enter the passkey 0000 and press OK. Note: Passkey cannot be changed from 0000. When your headset is successfully paired with your phone, the blue indicator light changes from steadily lit to flashing. additional help http://www.motorola.com/mdirect/manuals/QG-H300_9495A08A.pdf all the best sreejith 2 Step A - PUT HEADSET IN PAIRING MODE Note: To turn off headset