MMC card support in compaq

If the card reader is built-in on your laptop then -
You can download the device drivers from the Compaq/HP WEBsupport/download page. Make sure you select your model laptop and the Windowsdrivers you require and install them. Click on this link to download thedrivers: -
www.compaq.com/country/cpq_support.htmlhttp://welcome.hp.com/country/au/en/cs/support.html

Base unit device is usually the memory card reader or the memory card reader enhancement driver to make it faster.Go to HP/Compaq and get the driver....(http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=1842076&taskId=135).Make sure you use your correct v6000 model number to get all the correct drivers and updates for your machine.

Dear Artressfam,
Compaq Presario read all types of SD and MMC Cards,but all you need to do is connect your card to any USB card reader then insert USB card reader to on board USB port(Behind the Computer).
I think it helps.

Chandrashekhar

You need to go to the download and drive page for your laptop on compaq's site located here. It will ask you to select your Operating system select the one that was on it. then go to the Drive - Storage tab and you should see a Card reader driver. Download and install this should fix your issue, you may need to restart

If the memory card is recognized and readable in a USB card reader, the memory card is fine. If the 6910 does not recognize the memory card, either the card is not properly seated in the 6910 card reader slot, the card slot is not connected to the main board of the 6910 or you need a DIFFERENT device driver for the 6910.

Hi

try to connect your card reader to other PC if they can read!? if not you need a driver for your Card reader to read all card.

Thanks!

Hi,

I understand that now the Multimedia card is struck in the Media card reader of your notebook and you would like to know how to remove it.

Let me explain, there is no separate procedure to remove the card from the card reader.

Just insert and pull out, if it is not comming out when you pull gently, then you need technician help to remove it.

You need to contact local service center.

Well basically what you do is
1.) connect your memory card reader
2.) install the necessary drivers
3.) insert the memory card and it should show up as a removable disk in my computer similar to that of a pen)flash) drive

If the card reader is built into the computer then simply ensure the necessary drivers are installed (right click computer and select properties, then click device manager , it will show up in the list, if it has a yellow maker then it has a problem if its a question mark then it aint installed) if you dont have the drivers get them from the manufactures web page. IF everything checks out ok then put in the memory card and it will show up as a removable disk in my computer..

If you dont have a memory card reader or dont have the card reader built in then you will need to purchase one.

alll the drivers can be downlaoded from the compaqs site . u need to enter the seril number of machine . if that devices are shown in device manger with an yellow qn mark .then that devices will work if proper drivers are laoded . give me ur computer serial no . i will send the link to that files

hi your card reader conect to laptop & reset ..........then laptop start your card ok.