While taking pictures at normal settings (without zooming), every image is coming blur ,but when we zoom.....then the image is clear. Please suggest how can we correct this setting ?

because the camera is a 10x optical zoom. Once you go above the 10x it is no longer using the optics to zoom. it is using the "digital zoom" which is, in my opinion useless. you can disable the digital zoom in the menu options(recommended). basically it's taking the 10x zoomed image and cropping it or enlarging the pixels and that is where the blurriness comes from.

It's probably something to do with a lag or jam on your shutterspeed. so when you hit the button, and move you get a little blur. If its not this you might need to have your lens cleaned inside and out due to the camera zooms and catches the blurs on the lens after zooming so far in. I would recommend taking it to your local camera shop for adjustments and cleaning.

Barrel ether missing guiding pin(s) or broken plastic guides. Parts are available only as a whole Zoom Block Assembly.

Sounds like camera shake. When you use the zoom you get more camera shake. Try taking pix without zoom and see if you still have blurred photos.

Use only optical zoom and use a tripod.

The resolution of the photo you take determines how grain shows up as you zoom into the Photo, So taking a 10 megapixel photo on optical zoom or no zoom will give you a sharper picture than when you use both the optical and digital zoom to grab your picture. The digital zoom uses the centre of your CCD picture imager rather than the whole CCD so with less elements to your picture when you take it gives you blockiness sooner when you zoom in on the image. I am guessing your friend has digital Zoom turned off in settings to prevent the Graining showing upon magnification. Good light and a steady camera will give you the best results.

hi have you tried removing the battery for couple of hours so it can reset any settings that need to be set back to default it only resets camera memory not settings you have changed but this can sometimes solve the problem your having.

Also when you switch camera on and then press zoom when the camera switches off does the lense go back inside the camera as normal or does it reamin out.

when you switch in on do all the other buttons work like can you take picture and can you access all the menu if you can then take it off auto if its on auto then see if this let you use zoom if not then the chances are their is a fault on the zoom button either jammed could be that the lense motor has come out of line with zoom button, is the display clear when you go to take picture without adjusting the zoom is it still possible to take pictures

I am having a problem with blury pictures. Every one I take is blury and it also seems the flash wont go off. Now the pictures are blury even in the daytime. Anyone that can help me please do!!!!

If you are at maximum zoom ther likelyhood is that the shutter speed it long and you have camera shape coming in with will be amplified at high magnification.
Try shorter Zoom and non zoom pix they are Ok - then it is the camera shake thing.
A Tripod or a place to hold the camera steady is the remedy.

I don't think there's any problem. Simply, a longer zoom means that - without a faster shutter speed - there is an increased probability for camera shake. Additionally, cameras usually struggle with focus in longer zoom. To be sure that there isn't a fault, do this:

1) Place the camera on a tripod or other sturdy surface
2) For additional stability (and to avoid camera shake due to shutter button movement), select the self-timer
3) Focus and take the shot.
If it's still blurry, then yeah, there's a problem

It seems that the lense element which mooves while zooming the camera is stucked. normally this happens when the camera suffers a heavy jery, may be by dropping the camera. Resulting into disalingment of the lense assambly. You will need the help of repair shop to solve the problem.