I was using my ps 3 on my plasma tv connected by a HD lead. I then hooked it up to another tv using a scart lead and now it won't work. I hooked it back up to the plasma tv and it works fine. I need it to work on my other tv with the scart lead. There's no HD connection on it. Plase help

hi does your cable box have hdmi ports if so connect hdmi lead from cable box to to tv hdmi 1, if your tv doesn't have hdmi then connect scart lead from cable box to scart 1 on the tv hope it helps

regards
shaun

Try connecting TV to DVD with a scart lead or a hdmi cable now hdmi v cables are the next best thing from a scart lead

hello firstly scart lead from sky box to tv1 in) this is at the top there are two AV inputs ,,,on the bottom AV slot this is where your DVD conects too).iff you are using sky you will not need aerial in back of tv as this is for analogue use such as indoor antenna or outdoor antenna or iff using horizon the scart lead will suffice for all goodluck

Tuning of the TV not required when using scart lead, just select external input that the scartis connected to, ie AV1,AV2 (EXT1,EXT2) etc. The problem is possibly to do with the Virgin box, it may be set to HDMI out in which case it will not output anything via the scart lead, you would need to connect via an HDMI lead (small socket on the rear of the unit looks a little like a USB socket). Problem is if your TV is a CRT television its unlikely to have this socket. Your Virgin box can be reset to output via the scart but you would need to contact Virgin for this process.

Hi, I've just been given one of these. I'm not a 'Techy' but I am having the same problems as you so I'll share what I've found out so far.
The JVC GM-V42E is actually a plasma monitor, not a TV, as it doesn't have a built in TV tuner.
The picture quality is very good, as at the time it was produced, it was a top of the range plasma monitor for professional use, and was discontinued in about 2006. However, it is not HD/HD Ready, so you won't be able to use an HDMI cable or view programmes in HD. There is also no scart, so you can't connect it to the Sky box this way either.
I spoke to JVC Professional's technical department and they suggested using a scart to 3 BNC connector. The scart plugs into the Sky box and the 3 BNC connection plugs into the monitor. The monitor itself has loads of connections, the ones you want are labelled 'Component RGB/B'. The three pins you are after in this section are labelled 'Video' and each are called 'Y/G', 'Pb/B' and 'Pr/R'. This will connect the visual aspect, and you will also need a twin phono lead (red & white) to plug into your Sky box and into the monitor to connect the audio / sound.
I went to Maplin's and they don't sell these so I am trying a scart splitter that connects to the screen with a 3 phono lead (the red, yellow and white connectors). At the moment I am trying plugging these into the section marked 'Video B'. The 3 phono lead then connects to the splitter, where scarts from the Sky Box and DVD can be connected. I don't know if this will work yet - but I'll keep you posted and update this thread once I have managed to get it up and working...
Hope that helps... :-)
I have yet to try either solution, but will get back to you once I have tried them and tell you which one works.

plug in hd lead from ps3 to tv/now go to tv menu were you will see a choice of hd/scart/dv etc go to each till you find picture/or on remote av button/remember hd is not like a scart it does not switch ur tv to picture

I have just been given one of these, it not a TV, it is a monitor, and so does not have a TV tuner or a scart (it was made for professional use).
You need to plug it in to a DVD player/Freeview/Sky box using alternative means to a scart lead. You can do this by using a scart to 3 BNC lead and plugging this in where it says 'Component/RGB B'. This carries the picture, but not the sound. To get the sound you will need to plug a twin phono lead into the red and white audio plugs.
Alternatively, you can use the 'Video in' yellow socket to connect to connect to a DVD etc. The guy did this in Maplin's and it seemed to work.
JVC professional were really helpful on the phone, ask for their technical department, they can also email you the manual.

yes use hdmi cable or counpounts ? tell ps 3 only 720 p on this samsung max out puyt dont use ps3 in 1080 p mode in video settinsg ok

DVD Players/Recorders: Home Theater Setup, Installation & Hook Up ..

• Audio and Video Connection Guide
• What is HDMI Technology?
• HDMI Explained in Detail
• Audio and Video Definitions

Plasma or Video Projector Wiring Guide

Blue-ray Surround Wiring

lingbox HD Connect

Shopping results for multi connection sling box




DON'T FORGET TO RATE:;


Regards,
VOTIT

you need a ps3 scart lead. i think the one of the ps2 is the same but check. it should just hook up like a ps2. if you are having any problems with the picture hold down the power button when you start up the ps3 for 10 seconds this runs the optimal screen settings for the cable you are using. but if it is the first time you are using the ps3 it will auto start in set up mode. hope this helps