Need installation instructions for aerosharp HR-INV-XOI-030 solar inverter

Yes, it is possible to connect an FBI2000W inverter to solar panels. In fact, inverters are an important component of solar power systems, as they convert the direct current (DC) electricity generated by solar panels into alternating current (AC) electricity that can be used to power homes and businesses.
To connect the FBI2000W inverter to solar panels, you will need to:

1. Install the solar panels on your roof or other suitable location and connect them in a series or parallel configuration to achieve the desired voltage and current output.
2. Install a charge controller between the solar panels and the inverter to regulate the flow of electricity and prevent overcharging of the battery bank.
3. Connect the output of the charge controller to the input of the FBI2000W inverter using appropriate wiring and connectors.
4. Connect the output of the inverter to your home or business electrical system, following all relevant electrical codes and safety guidelines.

It is important to note that connecting solar panels to an inverter can be a complex process that requires specialized knowledge and expertise. It is recommended that you consult with a professional installer or electrician who can help ensure that your system is properly designed, installed, and configured for optimal performance and safety.

First, I'm not a Sungrow representative.
* Contact your local solar vendor or contact Sungrow;
* Sungrow Power; https://en.sungrowpower.com/
* Sungrow Inverter MFR; http://sungrow.energy/

*** following is for information only.***
* Normaly after a PV install, there should have been a representative from the solar company (local rep) to walk you through the system features and have your internet solar monitor up and running. This app will collect all your solar data (very technical) and convert it to a "user friendly" display of power your panels and inverter(s) are producing.
* Installing instructions(Official) WiFi; https://www.youtube.com/watch?v=LVzuXssdhlI
* Installing App on phone (Official); https://www.youtube.com/watch?v=cIWINw6Ym4Q
* LCD Module User Manual; https://www.sungrowpower.com.au/files/Web_Files/FAQ/Crystal/Monitoring/eShow-UEN-Ver11-201608.pdf
* Reading digital display (Local Rep); https://www.youtube.com/watch?v=6yTziB7PVqE
* Installation w/battery (Official); https://www.youtube.com/watch?v=tKDI5jwFLxA
* Dogle WiFi setup (Local Rep); https://www.youtube.com/watch?v=6NCnLMjg9rs
* Call your solar provider for support.
Aloha, ukeboy57

Yay, thank you so much!

have a technician load test the batteries and replace if necessary

I was not able to find a schematic for your inverter, only the user manual and some bad news.

Faulty Sunna Solar Power Inverters Gold Coast Solar Power Solutions

http://gold-coast-solar-power-solutions.com.au/posts/faulty-sunna-solar-power-inverters/

Solar Inverter Repairs

http://www.seq.net.au/solar-inverter-repairs/

http://gold-coast-solar-power-solutions.com.au/wp-content/gallery/solar-power-inverters/Sunna-Solar-Power-Inverter-User-Manual.pdf

Contact Circuit Board Medics at www.CircuitBoardMedics.com. They can repair the instrument cluster for you.

Mixing different AH rated batteries, different ages of even the same type battery is a bad idea. The new batteries will be effectively reduced to the equivalent of your worst battery.