Question about Panasonic KX-T7730 Corded Phone

2 Answers

Hi everyone, I have got a panasonic KX TES824 system. The guy before me changed the default password of the system. How do i reset the password? I tried opening the box and i see two buttons. one reset and one clr/open or something. i pushed the reset button but it doesn't go to factory defaults. some one please help

Posted by Anonymous on

  • Guillermo Acosta Dec 22, 2011

    Hi Gulzar,
    I'm tryiing to reset a PBX KX TES 824 LA following step that you list here, but don't reach to reset the PBX. Another tip to achieve the reset?
    Thanks in adevance!

  • Goddy Makokha
    Goddy Makokha Mar 13, 2014

    turn the power off , then slide the clr/open switch to clear, turn the power back on then ppress reset button for two secs wait for about 10 secs then slide back the switch open (0normal). Press reset again and try out your program. It should have reverted back to default pasword

×

Ad

2 Answers

Gulzar Cherichiyil

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 252 Answers

First the button clear position
anfter press hold reset 20sec

it will reset
after turn off PABX
move the button to open position

and strat the PABX



Please let me know this is helpful

Posted on Jan 06, 2011

Testimonial: "Gulazarh4 is very active and willing to help out.. he is a guy who has patience and the "know how" to help out newbies in this field. once again thx"

  • 4 more comments 
  • Anonymous Jan 06, 2011

    the same; it doesnt change. let me make sure. this is what i did.

    the pbx was in an on state. i changed the nor-> clear. then pressed the rest button (when reset button was pressed the led goes off) after approx 20 secs i released the reset button. and the led came up blinking. i switched off the pbx after led became stable. then moved the clr-> nor and then switched on the pbx.

    but the macine has not reset.

    thanks

  • Gulzar Cherichiyil
    Gulzar Cherichiyil Jan 06, 2011

    1.Switch2 move CLR position
    now green led blinking normally
    2.press RESET button 20sec
    after telese resset button led is blinking fastly
    3. this time move the switch2 NORMAL position
    now the led is stable.. PABX is reseted



    Please letme know is this helpfull or not

  • Anonymous Jan 06, 2011

    yeah, the last solution worked. thanks buddy you rock;

  • Gulzar Cherichiyil
    Gulzar Cherichiyil Jan 06, 2011

    Please take action if is satsfied on your fixya window

  • dialbat Feb 01, 2011

    Hello, will this reset all PBX settings to default as well or only password?

  • Gulzar Cherichiyil
    Gulzar Cherichiyil Feb 01, 2011

    this will be reset all PABX settings.... all data will be lose
    factory settings


    plz let me know this helpful

×

Ad

kennedy

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Hello i need the images for circuit diagram of pabx of tes824 panasonic

Posted on Nov 08, 2013

  • dasun nayanajith
    dasun nayanajith Jul 13, 2014

    can u tell me what is the default password for kX-tes824 and is there a way to reset only my password.

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i configure the panasonic kx-tes824 to allow outgoing calls?have done all the settings using the console software from my laptop and everything is working fine but i cant call outside lines.


Hello, How many CO Lines do you have connected to your KX-TES824 Phone system?. The ports that are not connected need to be deactivated. Go to CO -> Detail and uncheck the ports that don't have lines plugged in and click apply or OK

Jul 17, 2018 | Panasonic Lands Phones

1 Answer

How to active caller id for panasonic kx-t7730


It depends what telephone system the KX-T7730 is connected to. You should have a Panasonic box that says 'KX-TA624', 'KX-TEA308, 'KX-TES824' or similar somewhere.
Depending which Telephone System you have, it may just need programming or it may need an additional card (circuit board) installing. Panasonic KX TEA TES Telephone Systems Tiny Telecom

Nov 23, 2016 | Panasonic KX-T7730 Corded Phone

3 Answers

The card panasonic cid kx-te82494 not work my bpx model kx-tes824 v2.1.5


I suggest you ask for remote support from www.wanetelecoms.com

Otherwise, have you enabled the card and your Telephone Service Provider supports Caller ID?

Feb 22, 2014 | Panasonic Lands Phones

1 Answer

I have lost my programming password of Panasonic KX TES824. How can I Reset the Password?


i try to reset this pabx panasonic 308 many times but not totally reset theres is no other way to reset them..i turn on pabx and sw to clear position and pressing reset button but not back to default value..i need ur advice thanks and god bless

Mar 25, 2012 | Lands Phones

1 Answer

How to assign password for the extension not to make international calls


It's not a password, it's a restriction. You change the Class of Service for the phone and put in the international code as a restricted digit.

Check your Programming manual for the system.

Carl

Nov 26, 2011 | Panasonic KX-T7730 Corded Phone

1 Answer

I forget the password - KX-T7730


The default password is 1234. If the password has been changed to something else you need to perform a system reset to default values that will also reset all other programming like ringer settings, speeddials etc.

Feb 04, 2010 | Panasonic KX-T7730 Corded Phone

1 Answer

How do I change the time on my KX-T7730 telephone.


From the Switcboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset still on the cradle press Program * # followed by the system password ( default is 1234). Now press 000 and then Sp-Phone.Enter the year and then scroll to the month with the right scroll key (located at the right bottom corner of the phone). To change the month use the AUTO ANS / MUTE button. Now scroll right again and change the date and day. To change the day again use the AUTO ANS / MUTE button. Now scroll right again and the time will appear. Set the time. To change am/pm scroll to it and again use the AUTO ANS / MUTE button. Press Program to exit program mode and you are done.
Please rate this answer if it was helpful.
Thank you.

Jun 15, 2009 | Panasonic KX-T7730 Corded Phone

2 Answers

Lost panasonic KXT-7730 password


If you lost the password the only way to get into programming mode is to reset the telephone system to factory default. If you are not accustomed to all programming features this is not recomended because resetting will whipe out all programming including ringer settings, extension names, speeddials, routing and class of service. If you still want to reset let me know.

Dec 10, 2008 | Panasonic KX-T7730 Corded Phone

Not finding what you are looking for?
Panasonic KX-T7730 Corded Phone Logo

8,900 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Henk de Ruiter
Henk de Ruiter

Level 2 Expert

80 Answers

Cindy Wells

Level 3 Expert

6181 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...