Supra SW5L30D Front Load Washer / Dryer Logo

Related Topics:

Posted on Jan 21, 2018

I have SUPRA SW5L30D I emptied the lint trap. I can't get it back in securely. It is a long narrow grey part with white end that has some threading. I just found a round washer acriss the room that I don't recall on it, it too has threading. I can't get this trap back in securely. any advice?

3 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jul 13, 2008

SOURCE: Supra SW5L30D parts

You can get parts for the Supra SW5L30D from EdgeStar (can't figure out if EdgeStar bought Supra, or if Supra just changed their name or what). 866-319-5473. I've been able to get the parts I've needed, though they're not the most efficient operation. One time I had to wait for someone to get back from vacation before the part could ship...

Ad

Anonymous

  • 2 Answers
  • Posted on May 03, 2009

SOURCE: Supra Wash/dryer combo Model SW5l30D

check the heating element for power.

Anonymous

  • 232 Answers
  • Posted on Jan 08, 2010

SOURCE: How do I remove the lint trap holder. I have lint

you have to remove the top then the control pannel then the entire front. are you ready for this?

Testimonial: "Even though it was not what I wanted to hear, I do appreciate the incredible help. You guys are the best!"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Where are the service centres in india?

Based on information posted on the internet sites, it is very likely that Supra company has closed down. So it is best to contact the sales outlet you bought the washer/ dryer from. They may be able to tell you who they sold the service facility to in India. In USA the appliance maker EdgeStar Product services the Supra products.
0helpful
1answer

Lots of lint in bottom where the lint trap is at. cant get it out

You can connect a hose to your vacuum narrow and long enough to reach in the slot. I cut off part of an old garden hose to use with our vacuum. Clumps of lint will get stuck on the end of the hose and will not go through the hose so you will have to repeatedly pull it in and out to remove the lint. Good luck.
1helpful
1answer
0helpful
1answer

Water Continues to run in machine Supra Sw5L30D Front Load

I had this problem and the repairman told me it was a computer board malfuntcioning. My solution was to turn the water off after using the machine.
3helpful
1answer

Supra SW5L30D parts

You can get parts for the Supra SW5L30D from EdgeStar (can't figure out if EdgeStar bought Supra, or if Supra just changed their name or what). 866-319-5473. I've been able to get the parts I've needed, though they're not the most efficient operation. One time I had to wait for someone to get back from vacation before the part could ship...
0helpful
1answer

F&p dryer issues

Yes, there is a filter inside of that one. You are just emptying a receptical. Unplug the machine, remove the screw inside of where you remove the lint trap. remove that cover and vacuume out the area, you can use a blower to get more out (canned air). The two metal bars below the receptical are sensors, sometimes the back side of these become packed with lint and must be cleaned out as well. If the wires from the sensor comes off one must attach to the bottom bar and the other to the top. NOTE: On mine It is possible to connect the wires to the same bar, at opposite ends, this can cause damage.
Not finding what you are looking for?

111 views

Ask a Question

Usually answered in minutes!

Top Supra Washing Machines Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Jorgie  the...
Jorgie the...

Level 3 Expert

5639 Answers

David Spradling
David Spradling

Level 3 Expert

13524 Answers

Are you a Supra Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...