I need a user manual for KR-V5090 receiver - Kenwood Audio Players & Recorders

The speaker wires are short circuited. See Kenwood KR V7050 User Manual Page 32

Have you tried the "Simulated" surround setting?

If you don't get sound in "Simulated" mode then you have probably lost the surround channels.

If you do get sound then your "Media"
is not recorded with a surround "Track". or the surround "Processor" may have issues that need to go to the repair shop.

you can download your manual in this link
http://www.hifiengine.com/library/kenwood/kr-v5580.shtml
hope that it helped

You may download a copy of the manual from here.

Hi Vanpost941,
You can download the manual in pdf by clicking here. or here.

Hope this helps.Thanks!
Please rate this answer.

It's a standard receiver that can drive any standard speakers out there. It's totally up to you to choosethem and then go shopping.

Yes. It's in the manual.

http://www.retrevo.com/support/Kenwood-KR-V990D-Receivers-manual/id/479ci955/t/2/

The manual is available at retrevo: http://www.retrevo.com/support/Kenwood-KR-V6080-Receivers-manual/id/479bh942/t/2/ . You will need to enter a code to download the PDF.

I hope this helps.

Cindy Wells

You can get the manual on the link below.

http://www.scribd.com/doc/3279806/ManualsMania-Kenwood-KRV5570-krv5570pdf-Owners-Manual-English

http://www.retrevo.com/support/Kenwood-KR-V5570-Receivers-manual/id/479bh938/t/2/

Good Luck

you can check with kenwood web page for a diagram or even the manual