Hello
Here are some ways to transfer data from camera to computer:-
Run the software that came with your camera. Pop the CD into your computer and go through the setup steps. The only way you'll be able to transfer is if you have the software installed. If you bought the camera used or, for one reason or another, just don't seem to have the CD, you can probably find a used or maybe even a new one on eBay. You might be able to find it somewhere else as well.
Connect the camera to the computer. Let's face it, the pictures aren't going to the computer if there is no cord to connect them. Most of the time, you'll hear a sound or something will pop-up if the camera is connected properly and working.
Sync the camera to the computer and transfer the pictures. With most camera software, as soon as you connect the camera to the computer and it recognizes it, something will pop up asking if you would like to sync the pictures to the computer. After that it's pretty self-explanatory. If nothing pops up or it never was supposed to pop up in the first place, open the camera program. Most likely you'll be able to find your way from there. If not, read your camera manual. It should tell you even more than this how-to.
Another option is to buy a Memory Card Reader. They will go by the name " 6 in One, 12 in one, USB Reader Writer or Flash Memory Card Reader Writer. They allow all memory sticks and cards to be recognized by your computer. On Windows XP, you just plug it in and find it as another drive on My Computer.
Hope this helps, if so do rate the solution
67 views
Usually answered in minutes!
×