It worked when i took it out of the box, but since i washed the removable parts it will not run. i returned the first one i bought but the second one does not work either. help

Question edited for clarity.
Question moved from Washing Machines to a better category.

This appears to be an Australian machine and is unknown in North America. The is nothing on it apart from people selling them and no manual available.

Normally, you remove the top. Then you remove the macerator, the part with the teeth. Then finally the basket. You wipe out the machine with a wet cloth and put it back together again after washing rinsing and drying the removable parts. The machine itself is not washable.

https://www.google.com/search?q=grant+hackett+juice+machine+cleaning+instructions

General videos here on cleaning juicers and they are all pretty similar.

https://www.google.com/search?q=+juice+machine+cleaning+instructions

..

I had the same problem. Mine completely stopped working after I put a small carrot in there. Can't find a customer service number for them. I did find an email for Antoinette Ramos. [email protected] She emailed me back and said they would send me a new Juicer. Almost 20 days later, I have not received it and I can't get a reply email from her at all. I just looked at the email and her phone number is on there, so I will be calling. Here it is incase you still need it.

800-423-4248

Good luck.

Jayme

Manuals for the Jack LaLanne Power Juicers can be found here:

http://www.powerjuicer.com/power-juicer-manuals.php

You might take time to browse the site, you will find How To videos, manuals, Tips and recipes.

Things You'll Need:

• Soft-bristled brush
• Stiff-bristled brush
• Dishwasher (optional)
• Mild detergent
• Lint-free microfiber cloths

1. Unplug your Acme 6001 Juicer. Carry it to a countertop near your kitchen sink.

2. Remove the pusher and cover, and set the pieces in a sink. Unscrew the clutch, remove it and set it in the sink. Remove the cutter blade, strainer basket and juice bowl, and place the pieces in the sink.
3. Discard or remove and store any pulp that you find in the strainer basket. When you're finished, rinse the remaining fruit and vegetable pulp and juice from the pieces under cool, running water. Dislodge hard-to-remove pulp from the cutter blade and strainer basket with a soft-bristled brush or with a stiff-bristled brush if necessary.
4. Wash the pieces in a dishwasher or by hand. To wash in a dishwasher, place the stainless steel pieces in the lower rack and the plastic in the top rack and wash on a normal cycle with other kitchenware. To wash by hand, fill the sink with warm water and a few drops of mild detergent and wash with a lint-free microfiber cloth.

5. Run the pieces through the rinse cycle in your dishwasher or rinse under running tap water by hand. Air or wipe dry the pieces.

6. Wipe the base with a slightly soapy cloth. Rinse with a damp cloth and wipe dry. Reassemble your juicer by returning the pieces to the base in reverse order.

     for a visual:http://www.youtube.com/watch?v=alumocbDHg4
     "DON'T FORGET TO VOTE PLZ"

the first solution is half right ... there are 2 hidden switches on the machine which are activated by shafts on the pulp container and on the top lid .if either is not on then machine will not work. possibly broke plunger on the pulp container ....or broken clip that holds the container in place

I have a 1962 manual which might be too old but here's what it says: When juicing is completed, simply remove the spring-clamp top, unscrew the wing nut or spring clutch that holds down the cutter blade, and all parts to be cleaned may be lifted from the base. Bowl and top, being non-porous, similar to glass, require only rinsing. Blade should be washed under running water, using a stiff brush. Since the basket is made of stainless steel, it, too, cleans easily. After taking out the the pulp, let cold water run on the outside of the basket while you brush the perforated section. Any remaining particles of pulp will be loosened and can be removed with a damp sponge or by rinsing. Dry and reassemble for next use. Turn machine on and let run a few seconds.
Hope this is of some help.

Bought an open box Waring JEX 328 from Linens and Things (going out of business so need to return quick if it is defective) and plugged it in and nothing happened! So now trying to figure out if all pieces are in their correct place. There are two small plastic pieces that seem to go together a smaller angled black piece and a long light plastic piece. Any thoughts? Is there an auto kill switch on these if something is not assembled right?

Yu have to have the juicer on and properly postioned, it has a little magnet that activates the machine, if it is not on it will not turn on.

Here's the link for all manuals for Acme:
http://waringproducts.com/ret/catalog/product.php?product_id=29&cat_id=2

REMOVE BOTTOM AND TRY ADJUSTING
RESET BUTTON BY TWEAKING SMALL
SCREW ON BUTTON HOUSING. TURN
EITHER WAY TILL YOU HAVE LONGER
RUN TIME.