Error code: 932 - IBM Infoprint 1352 Laser Printer

Question edited for clarity and add Maker.
Question moved to maker category.

Number 1 Tip, never ever use the self cleaning feature. It only exists to break the appliance and create the need for parts and service calls. The temperature is just too intense for the parts.

A self-cleaning or pyrolytic oven is an oven which uses high temperature (approximately 932 °F (500 °C)) to burn off leftovers from baking, without the use of any chemical agents. The oven can be powered by domestic (non-commercial) electricity or gas.

Why You should Never Run A Self Clean Oven Cycle & ...

General Appliance Service https://www.generalappliancesvc.com > why-you-shou...

Jan 29, 2020 - A self-cleaning oven is a feature on many modern ovens that burns off cooking spills and splatters with an extremely high temperature (932 F° or ...
--------------------------------------------------------------------------------------
The only thing suggested is doing a power cycle, but the heat has probably fried the control board which is located too close to the oven and all that heat.

https://www.google.com/search?q=KitchenAid+KGSS907SSS00+F3+E3+Error

..

Anonymous,
The error 091-932 refers to The Drum Cartridge (Y) has reached the replacement time.
Thank You,
Dell-Jesse L
Dell Social Media and Communities

Hi,
Please visit this links and read it and follow instruction step by step.
support lexmark com and Lexmark Error Codes 930 931 932 933 934 935 Printhead Error and Lexmark Printer Support

Thanks,

• 4.3L (VIN W)

AC Type 41-932
(GAP 1.52 mm, 0.060 in)

• 4.8L (VIN V)

AC Type 41-932
(GAP 1.52 mm, 0.060 in)

• 5.3L (VIN T)

AC Type 41-932
(GAP 1.52 mm, 0.060 in)

• 6.0L (VIN U)

AC Type 41-932
(GAP 1.52 mm, 0.060 in)

Print a Parameter Setting Report.
Power off the printer.
Close all printer covers and doors.
Hold down the and buttons on the printer and power the printer on.
Release your fingers from the keys when the message Diagnosing... appears.
Customer Mode and ESS Diag are displayed.
Press the button to select Customer Mode.
Press the or button until Parameter appears and press the button.
On the LCD, the Parameter menu appears.
Press the or button until Print appears and press the button.
The Parameter Setting Report prints.
Press the Cancel button to stop the test.
Reseat the toner cartridge based on the error: Yellow = (0093-930) Magenta = (093-931) Cyan = (093-932) Black = (093-933).
If error persists after reseating the cartridge replace the cartridge.

Most likely this:
4X Blink error code = Balancer Error
The 4X blinking error code is used on models which have a dimming LED backlight.
If a failure happens the TV will shut down and display this diagnostic code.
Contact Consumer Electronics support for repair options.
http://esupport.sony.com/US/p/support-info.pl?info_id=932

Error T98-932 means:
Type T98: Hardware error Point 932: (I could not find this number in my manuals)
Seems that this is a very strange error ...

i have lost my code due to battery going flat siemens vdo cdr 2005

go on line and type in

ibm infoprint 1352 laser printer error 932

enter

or

ibm 1352 infoprine error message 932

rod

error 932 Printhead—lost hsyncs Replace the printhead.