I have moved house and in the process the white and black cable went missing of my pioneer Pure Vision Plasma TV 50-inch PDP-504HDE. I need to buy a new one. Also, before the plasma screen was wall hung but now I do not have enough walls and I need a stand. Where can I find one and how much would it cost?

Hello
Just do a factory reset to all option. Just go to its user manual page number [[64]. All the details are described there. OK.

Age... Pure and simple. The backlighting and the display panel start to fail and the white is the first you start to notice, its probably not going to last a lot longer. Plasma tv's are nearly impossible to repair now days due to parts availability and service information, plasma tv's just went the way of the dodo bird, its all LCD now days. Ever time i get a plasma tv in for repair its generally headed for the recycling dumpster.

Default password could be 0000
receiver needs to hav tv output plugged into an input selection in the back of it.

Would need model number to search properly. On some sets a capacitor "C2601" of Y-Drive assembly contacts the audio bracket and it is damaged, can cause a abnormal picture.

You can try a hard reset : Unplug TV from AC mains and remove all cables from TV. Wait about 30 minutes and replug to AC power and redo the cabling. Switch on the TV and see if it works..


Good luck..

transistor problem

Try the scan PCBs that run down the side and the connectors that hook them up to the rest of the system. That would be my first place to start.

Unfortunately I don't have service manuals for non-european models. What is the date of manufacture?

Red flashing x2 = Panel power supply fault

It would be easier to replace the power board than attempt a repair at component level (dangerous voltages)

you guessed right you got a problem with the projector, I always point my finger to Power suppy problems on these sets for about any other problem would mean throw-away or too expensize to fix. good luck

Same problem, 42" lg plasma