Just installed vm9312

You've got the wrong player, this does not support dual feature, you'll need a Panasonic or Pioneer line that has those features.

Hi,

Unfortunately, that is not possible. Sorry...

pulll the unit out there will be a wire marked park brake or most likly pink (remeber coming from the head unit ) next splice it in to the black wire or to a ground

they are not the same. the media link will work for that model.

This is a built in temperature overheating contermeasure. Make sure your xbox is not in an enclosed area or on a carpet. If posssible, place a fan next to it and see if that gets you increased playtime. If it does, then you know its a problem with it overheating.

Is this only playing a specific game? Every Game? Demos? Listening to Music? Watching Dvds?

Playing a game puts the most stress on the 360.

Try this (this is the procedure for the 9311TS model, which I have, and it should be the same for yours too) - put in a regular movie, and do what you need to do in order to be able to watch the movie (cycle the e-brake handle, toggle a switch - however you have it set up). When the movie comes on, using the remote, hit STOP twice, then type in 1264, and a hidden menu will appear. This menu has the macrovision toggle - turn that on. While you're in there, you can also disable the parking brake bypass (turn the bypass on - no more e-brake handle or toggle switch!). Then hit the SYS SETUP button on the remote twice to save the choices you made, and you should be able to watch the burned movie then. You'll also find that it's nice to be able to just stick a DVD in and have it start playing.

disconect the blue wire from the wireing harness and conect it with the blue with white u will not need the all blue wire

go to the radio press setup on your remote then press 543210, a secret screen will pop up press the hammer and skrewdriver,u will see brake overide put it on the on position,thenpress the X at the bottom of the screen,then your all set.

go to am/fm
then open the settings screen
next on your remote type 5,4,3,2,1,0 listening for each beep
a new screen should come up
after that look for brake override

My iphone works fine, it is a firmware version 1.1.2, maybe you have a different firmware version. you might have to upgrade or downgrade.