Buttons will not work and cant dial out - Motorola Mobility RAZR V3

Hello, you need to go to "Contacts", hit the multifunction button right twice, until you get to Favourites, and here you can simply assign numbers from your contact list to the speed-dial buttons. Hope this helps. [email protected]

Tone/Pulse
You can switch the dial mode. In most situations the TONE option should be selected.
Press the "Menu OK" button. Select BASE using "

On the phone press PROGRAM, press the original DAY button, dial the number 2, dial 781#, press AUTO DIAL STORE, pick up and drop the handpiece.

As an owner of the 7900 i'm assuming your talking about Error-80

If this is the one, turn the ignition on, using a pencil or similar item press the button just to the left of the eject button. this will completely reset the internal flash memory. Once it turns back on hold the dial in until you get into a setup screen. rotate the dial counterclockwise to "BT Memory"
press the dial to the right and it should come up with "reset?" now press the dial. 99% of the time it will say error but it still completes. Now turn the stereo back on and press the phone button. pair your phone to the stereo and viola you're all set.

Try rebooting the device - press and hold both, the top-button (power) and that big button on the bottom.

i suggest sending it back to where u purchased it because there is probably an electrical malfunction

There should be a button on the top that opens the watch, under this is a dial, you lift the dial not the button, there should be a click and the watch will stop, then swivel the dial to set the time.

Feature 14 comes to mind. It's the VM Transfer button for a Partner Voice Mail.

You set it up by dialing FEAT 00 press the button and dial FEAT 14. End programming by dialing FEAT 00.

To use it, when a call comes in press the VMXFR button and dial or press the person's DSS button.

Carl

None for now.

try formatting the phone through throuh pc