All areas that should project white are yellow could this mean bulb is getting old or maybe the settings of the compoter its hooked upto need to be chnaged please advise

its the auto white balance, its not reliable especially if using a flash. maybe you arent experimenting with all the modes and just keep using auto.

You have them hooked up right. Are you beyond that, I mean is it not activating?. If so, be sure you scroll through the video settings. It should then connect.

the bulb only makes the brightness needed for the color engine to show through the color engine on your set is on the downward spiral and the bad part is they coast as much as 6-10 bulbs plus you have to get them installed sorry to be the bringer of bad news

Probably had too high wattage bulb and basically, it burned the lens cover. Remove the old lens and "project" to see if the yellow circle is projected. Iif so, purchase a new lens cover.

If you have already adjusted the color through the menu then it maybe hardware related. Replace bulb, and have internal projector removed and cleaned to see if this helps with the whites.

Howdy,
Yes, the problem is with the EEPROM, but you need to have the proper CorrectionTool (LSUQ0100).
But don't think it's availible to the public.Call a Service Company, but make sure they have the "Correction Tool".

Thanks for choosing FIXYA, big IRISH.

plug the yellow one in to the yellow hole. plug the red one into the red hole and plug the white one into the white hole. then make sure your tv is set to the proper audio/ video input

Since you have eliminated the bulb, you must now carefully and meticulously clean the optics and lenses in front of the bulb.

could be bad bulb is it setting in right is coler wheel freeley moving

Most cable boxes have outputs for audio and video. Yellow is the video, red is the audio out for the right side and white is the audio for the left.
Take a set of RCA jacks and hook it up to the back of the set on input one.
Yellow to Yellow
Red to Red
White to White.
You need further instruction, respond to this post and I will reply.