SOURCE: I cannot set the date on my Citizen SkyHawk Eco-Drive
Just pull the crown out, turn it so that the bottom analog display is set on "CAL" and push crown back in. Voila!!
SOURCE: I cannot set the date on my Citizen SkyHawk Eco-Drive
The watch will automatically set the time and date when it is in receive mode (Mode hand is on CAL, TME, RXS) Pull crown out 1 click, turn crown to put mode hand in the ORANGE zone. push crown in. Set on stable surface with the 9:00 position facing the direction of the atomic clock signal. Push and hold lower button for 2 seconds till it beeps. it will enter RECEIVE mode and in 2 -15 minutes it will (if there is signal) update time and date automatically. While in RX mode the lcd windows will flash between RC & RX, the second hand should show signal level between 1 & 3 hr positions.
Do NOT move the watch until it has resumed the one second sweep motion and made a beep.
319 views
Usually answered in minutes!
×