The tv have a problems known as a convergence problems,it dead.The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.The tv convergnece board,must have these parts changes on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.
Hi,
This kind of problem occurs due to convergence output chips failure, replace convergence output ICs in tv to solve this issue.
IC replacement in circuit board requires soldering work and good knowledge of electronics, if you are handy with electronics stuff repair and want to repair tv by yourself then let me know to provide you more info OR call local tv repairman to do this job.
Thanks.
SOURCE: Red Green Blue jets appear to be off. Double
You have a common problem.
This model (WS55511) uses a single convergence chip and after 5-8 years it fails. I will attach a photo of what the chip looks like and also a typical convergence problem.
I have fixed hundreds of these sets with this problem.
If you are handy or know someone who is I have available step by step, start to finish instructions for this repair in this model set.
They tell you everything you will need and how to do it from beginning to end.
Parts cost (On EBAY) is about 14 dollars for the chip plus shipping.
Let me know if you want the instructions and I will post them here for you to copy/paste.
SD TECH
SOURCE: 53UDX10B 53 in. Rear Projection "3D vision"
the convergence IC`s and associated resistors have to be replaced, do not repeatedly push magic focus or the alignment after the parts change out will take longer which of course means higher repair bill, good luck
SOURCE: double picture
Call a technician to recalibrate your color guns. They usually need to be recalibrated yearly, lately. Many times the cost of getting it service exceeds the value of replacing it with a new one.
SOURCE: picture / colors are distorted, kind of seeing
Sounds like the convergance ICs. search posts re that.
SOURCE: curved double image at bottom of TV and looks like
Projection TV sets have several common problems listed below.
Problem #1) Convergence
Symptoms:
Problem #2 CRT Fluid has clouded over. Symtoms
You can see some examples and find a fix here...
http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull
942 views
Usually answered in minutes!
×