Question about Aiptek IS-DV2 Camcorder
Try re-formatting the card in your PC
Posted on Dec 25, 2009
Thanks! I didn't know it had sliders on it either! :)
Posted on Aug 07, 2009
IT IS AN AIPTEK PROBLEM. PUT A SMALL SECTION OF OPAQUE TAPE (NOT SEE THROUGH TAPE) OVER LOCKING SLIDE ON CARD. THIS WILL WORK BUT DO NOT COVER THE ELECTRONIC CONTACTS.
Posted on May 27, 2009
This worked for me. I had no idea memory cards had that little slider on the side. Thanks for the help and God Bless
Posted on Aug 27, 2008
First check the memory card to see if the lock tab is in the UNLOCK position. On the top left of the memory card is a slide the moves up and down. The slide should be in the up position for it to be unlocked. A locked memory card could cause the camera to read a CARD PROTECT error message.
If you still receive an error message, verify that you are inserting the card correctly so that the spring locks in as you fully insert it. When performed correctly an Icon will appear in the lower right hand corner of the LCD screen. Also try inserting the card while the camera is on.
The memory card may also need to be formatted through the camera’s settings-- Note: Formatting will delete all files, so be sure to transfer any important files to your computer before doing so
To Format: Insert the memory card into the camera and press the mode button to get to the mode screen. Enter into Tools/SETTINGS and find FORMAT. Once you select format you will receive a YES or NO option. Select YES and you will see a FORMATTING message. Once the formatting is complete, see if the camera reads the card and functions properly
Posted on Jul 27, 2008
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: